MOTOR ASSEMBLY,AC,PUMP

I started ,by taking the screws that hold the top lid on the back , once I did that I popped it up , there were 2 screws on the top edge that hold the front, took those off , I removed the seal boot spring , after that I took the filter cover off along with the screw that holds the the plastic case , then I had to pop that out as well , ... Read more once I did that there was 2 more screws that held the front cover , those came out too, finally the front cover can be removed right after you unplug the interlock switch. And that is the hard part every thing else is pretty simple because the drain and circulation motors are right there along with plastic case that holds them side by side unplug the hoses , wires take it out , take pictures so you know how everything goes back on and to reinstall just reverse the process.