Part Location Diagram of WD03X10031 GE Door Spring
See part 52 in the diagram
( Grid squares measure 1x1 inch )

Door Spring

Works With Model GLDT696T00SS!
$ 13.17
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX1481851
Manufacturer #:
WD03X10031
Manufactured by:
GE
Works With Model GLDT696T00SS!

Product Description

This door spring is approximately 7 inches long. The dishwasher door spring applies tension to the dishwasher door through the door hinge to prevent the door from dropping too quickly when the unit is opened. If the dishwasher door will not open or close properly, check the tension on the spring by opening and closing the door. Also, check for any damage to the spring itself. A damaged, or fault spring should be replaced to ensure the dishwasher does not link during the washing cycle. Use caution when installing the door spring because the spring is under tension and could snap.