1481237-1-M-GE-WB27X10928 -FUSE
Part Location Diagram of WB27X10928 GE FUSE
See part 101 in the diagram
1481237-1-S-GE-WB27X10928 -FUSE 360 view
( Grid squares measure 1x1 inch )
1481237-1-S-GE-WB27X10928 -FUSE 1481237-2-S-GE-WB27X10928 -FUSE 1481237-1-S-GE-WB27X10928 -FUSE 360 view
Part Location Diagram of WB27X10928 GE FUSE

FUSE

Works With Model RVM1535DM1BB!

Rated by 10 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$10.58
In Stock
Fix Number:
FIX1481237
Manufacturer #:
WB27X10928
Manufactured by:
GE
Works With Model RVM1535DM1BB!
Product Description
This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the microwave becomes unresponsive, the microwave produces little to no heat, or the appliance simply does not turn on, it could mean that your fuse is at fault and needs to be replaced. Because this part contains an electrical charge, remember to disconnect power to the microwave unit before you begin this repair. NOTE: Before you start this repair, ensure that the microwave is unplugged, and the capacitor is discharged. A capacitor stores large amounts of electricity even after your microwave is unplugged.
Works with the following brands:
General Electric, Kenmore, Hotpoint
Works with the following products
Microwave, Microwave Oven Combo, Range, Wall Oven
Fixes the following symptoms
No heat, Won’t turn on, Touchpad does not respond
Part Number Cross Reference
Part# WB27X10928 replaces these:
AP3994062, 1262970, WB27X0713, WB27X10114, WB27X10247, WB27X10288, WB27X10388, WB27X10474, WB27X1077, WB27X1159, WB27X713
2 Questions and Answers 10 Installation Instructions Model Compatibility
Product Description Questions and Answers Installation Instructions Model Compatibility

Product Description

This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the microwave becomes unresponsive, the microwave produces little to no heat, or the appliance simply does not turn on, it could mean that your fuse is at fault and needs to be replaced. Because this part contains an electrical charge, remember to disconnect power to the microwave unit before you begin this repair. NOTE: Before you start this repair, ensure that the microwave is unplugged, and the capacitor is discharged. A capacitor stores large amounts of electricity even after your microwave is unplugged.

  • Works with the following brands:
    General Electric, Kenmore, Hotpoint
  • Works with the following products:
    Microwave, Microwave Oven Combo, Range, Wall Oven
  • Fixes the following symptoms:
    No heat, Won’t turn on, Touchpad does not respond
  • Part# WB27X10928 replaces these:
    AP3994062, 1262970, WB27X0713, WB27X10114, WB27X10247, WB27X10288 , WB27X10388, WB27X10474, WB27X1077, WB27X1159, WB27X713 Show less

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
October 1, 2021
I have replaced the fuse 20A on my microwave and it keeps blowing out right away. Can you let me know what I’m missing or what I’m doing wrong with please? Thank you
For model number JVM3160RFSSS
Fix.com logo
Hello Frank, Thank you for the question. This is normally caused by a defective Door Switch. There are three switches in the appliance Lock area. You will need to test each switch to check the continuity. When the defective switch is activated, it can trip the breaker or blow the fuse. We hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
MICRO SWITCH(STAND ON)
$36.12
In Stock
Microwave Door Interlock Switch
$65.77
In Stock
SWITCH MICRO MONITOR
$60.20
In Stock
Barbara
February 17, 2023
Where is the compositor and how do you make sure it is discharged?
For model number JVM3160DF2WW
Fix.com logo
Hello Barbara, thank you for contacting us. According to our research, the capacitor, part number FIX8754629, is present near the transformer. You can discharge the capacitor by touching the plier's arm with the capacitor terminals. We hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
H.V.CAPACITOR
$135.52
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.0 / 5.0, 10 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Richard from Milwaukee, WI
Parts Used:
WB27X10928
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Microwave was totally "dead".
This microwave is positioned above the stove and under a cabinet. The fuse can be replaced by leaving the microwave intact. First, unplug the unit. Use a phillips screwdriver to remove the outer exhaust vent cover. On the right (next to the clock) remove a 2nd metal cover (about 2" x 4"). Use a flashlight and look into this cavity right b ehind the clock. You will see the fuse. Reaching the fuse presents a problem as most hands are too large. However, I was able to remove the old fuse and insert a new one with a pliers. Be careful in 2 respects. First, make a foil tray and place it below the fuse. In case you drop the fuse, you can catch it. Second, grip the fuse firmly, but not hard so as to avoid breakage. Replace the metal cover and the vent cover and plug in the unit. BINGO, it works!
Read less
20 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alan from Houston, TX
Parts Used:
WB27X11033, WB27X35382, WB27X10928
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench set
would not heat ........all displays, lights, turntable seemed normal
opened the cabinet, tested the multiple switches for continuity...seemed OK.....the unit would run, but when the magnetron engaged - no heat...one of the fins on the magnetron had broken loose from its assembly....I first replaced the magnetron & still no heat.....I then replaced the capacitor & diode...and success..works fine.I purchase new sheet metal screws at bigbox to resecure the cabinet...the odd heads on the original ones wallowed out, even with the proper driver
Read less
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Magdalen from Littleton, CO
Parts Used:
WB27X10928
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Microwave key panel would not work. Message said "short, may need service."
Opened the microwave door & removed 2 screws from the plastic panel. Removed one more screw to be able to see the fuse. Removed the fuse & inserted the new fuse using needle pliers. Pushed the fuse down to be sure it was inserted. Once the microwave was put back together it displayed "demo" mode and we used the trouble shooting instru ctions to get it working again. A repairman had said it would cost $623 for a new key pad. A new microwave was less expensive than a repair.
Read less
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Fort Wayne, IN
Parts Used:
WB27X10928
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
microwave did not cook
Microwave still does not cook...have no way of troubleshooting any additional parts...no manual...probably replace...seems to operate however it does not warm the contents...thanks for a submittal link
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
rose from fairfax, VA
Parts Used:
WB24X10115, WB27X10928
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Oven completely broken: nothing worked
Purchased fuse, replaced fuse, closed oven grill: back in full function! Your company is the BEST selling parts I need in addition to excellent, easy-to-follow install instructions. I am a single mom and I can repair anything as long as your company is around! Saved sooooo much money doing it myself.
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from Jacksonville, FL
Parts Used:
WB27X10928
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
The microwave doesn't heat
I loosened the mounting screws in the cabinet just enough to where I could access the two screws on the microwave top vent. I removed the two screws and slid the vent cover off. I removed one screw from the small grill which gave me access to the fuse. Being careful of the wires I used needle nose pliers to reach and remove the old fus e, then install the new one. I reattached the grill with one screw and then the vent cover with two screws. Finally I lifted the microwave back into position to make it easier to tighten the cabinet mounting screws. Unfortunately upon testing the microwave there was a furious growling and after 5 seconds the new fuse popped...fried magnetron. Considering the advanced age of the unit and the cost of a magnetron, I decided to purchase a new microwave (always thoroughly read the installation instructions as there are actions needed to prepare it depending on venting or recirculating. Also the cabinet screw holes WILL NOT match and you will need to use the template to drill new holes).
Read less
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Deborah from Cary, NC
Parts Used:
WB27X10928
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Heat not working on microwave
Easy, but other problems. Thanks
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Dallas, TX
Parts Used:
WB27X1160, WB27X10928, WB27X10240, WB27X10194
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
The microwave would turn on, but provide no heat.
I had to pull the unit from the wall by removing all of the mounting screws. Also removed the front panel of the unit to expose all of the parts. That was the longest part of the repair. The rest; replacing part by part was easy. The only thing that held up the progress was the polarity of the thermostat. I either guessed right, or it didn't matter. Once all of the parts were replaced, I powered up the unit, put a glass of water in the microwave to make sure it worked. Then I reinstalled the unit in its original spot and replaced all of the mounting screws, front key panel. It was a good hour in total, most of that removing and reinstalling the unit above the stove.
Read less
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
RAJ from LLOYD HARBOR, NY
Parts Used:
WB27X10928
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
No power
Very easy. Need two people to take out microwave as it is heavy. Great help and saved me a bundle. Thank you so much.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robin from Bloomfield, CT
Parts Used:
WB27X10928
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Keypad stopped working
replaces fuse
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX1481237
Manufacturer Part Number: WB27X10928
Brand
Model Number
Description
Kenmore
36362702200
Microwave
Kenmore
36362709200
Microwave
Kenmore
36362709300
Microwave
Kenmore
36363672200
Microwave
Kenmore
36363672201
Microwave
Kenmore
36363673200
Microwave
Kenmore
36363674200
Microwave
Kenmore
36363674201
Microwave
Kenmore
36363679200
Microwave
Kenmore
36363679201
Microwave
Kenmore
36363692301
Microwave
Kenmore
36363692302
Microwave
Kenmore
36363692303
Microwave
Kenmore
36363693301
Microwave
Kenmore
36363693302
Microwave
Kenmore
36363693303
Microwave
Kenmore
36363694301
Microwave
Kenmore
36363694302
Microwave
Kenmore
36363694303
Microwave
Kenmore
36363699301
Microwave
Kenmore
36363699302
Microwave
Kenmore
36363699303
Microwave
Kenmore
36363703600
Microwave
Kenmore
91141485890
Microwave Oven Combo
Kenmore
91141485991
Microwave Oven Combo
Kenmore
91141485992
Microwave Oven Combo
Kenmore
91141485993
Microwave Oven Combo
Kenmore
91141485994
Microwave Oven Combo
Kenmore
91141485995
Microwave Oven Combo
Kenmore
91141485996
Microwave Oven Combo