Part Location Diagram of W11192795 Whirlpool Hub Gear
See part 8 in the diagram
( Grid squares measure 1x1 inch )

Hub Gear

Works With Model 4KV25H0XMC5!
★★★★★
★★★★★
4 Reviews

Rated by 6 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$22.09
In Stock
Fix Number:
FIX12348886
Manufacturer #:
W11192795
Manufactured by:
Whirlpool
Works With Model 4KV25H0XMC5!

Product Description

This hub gear is a genuine OEM replacement part for your stand mixer. This kit includes both the beveled gear and attachment and is also referred to as a worm follower gear. This gear assists with the rotation of the planetary assembly in the mixer. If the teeth of the gear have worn out, or nothing rotates when the mixer is turned on, you may need to replace the hub gear.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.8 / 5.0, 6 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
carol from whittaker, MI
Parts Used:
W11086780, WP9703680, W11192795
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
mixer skipped while turning
followed instructional video the hardest part was removing the snap ring! once that was removed it was a piece of cake!
14 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bob from NORTH AUGUSTA, SC
Parts Used:
W11086780, WP9709511, WP9707223, WP9703438, W11192795, W11200218
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
The mixer would not spin.
Took the cover off of the transmission and replaced gears, pin and gasket and added new grease.
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alan from Mercer, PA
Parts Used:
WP9703680, W11192795
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The Bevel Gear had stripped several teeth off
1.Remove Mixer top (4 screws) 2.remove gear case cover (4 screws) 3. Remove old retaining ring 4. Lift old bevel gear from shaft. 5. Remove retaining pin from shaft and drop shaft out bottom 6. Remove ALL old grease making sure to get all metal pieces from old bevel gear. 7. inspect all gears for damage 8. replace shaft and retai ning pin 9. Place new bevel gear onto shaft and secure with retaining ring 10 Install new grease liberally 11. replace gear cover case and secure with 4 screws 12. Replace case top and secure with 4 screws
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
chris from PHILA, PA
Parts Used:
W11086780, WP9709511, WP9709231, WP9707223, WP9703680, W11192795
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Noise and no motion
1 Open case and get to the gear assembly 2 remove snap ring and remove gear
3 remove pin and remove and replace gear
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Fremont, CA
Parts Used:
8212396, WP9709194, WP67500-55, WP9703680, WP9703438, W11192795
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Accessory input port striped. Not driving attachment.
Problem found is plastic transmission cover cracked causing too much play between gears causing them to skip and strip. New replacement cover is cast metal. Great improvement. Remove trim ring (one screw). Remove top cover (4 screws). Remove plastic transmission cover (4 screws). Remove snap rin g that holds too beveled gear. Replace gear and re install snap ring. Replace gear in transmission (other beveled gear) I also replace bronze bushings at each end of the adjacent worm gear. Re pack all gears and transmission cover with fresh grease. Reinstall all gears and transmission cover. Ensure all components are properly seated and lined up. Re instal cover and trim ring. Easy fix. Less than an hour. Works as good as new. Replacement parts fit perfectly.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Butte, MT
Parts Used:
WP9707223, WP9703680, W11192795
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Bevel gear broke
Took it apart. Saw the broken gear. Got online and ordered the parts and completed the repair as soon as the parts came.
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (4 Reviews)
4.8
★★★★★
★★★★★
Filter By Rating:
  • 5
    3
  • 4
    1
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX12348886
Manufacturer Part Number: W11192795
Brand
Model Number
Description
KitchenAid
4KB25G1XBU3
Mixer
KitchenAid
4KB25G1XBU5
Mixer
KitchenAid
4KB25G1XBY5
Mixer
KitchenAid
4KB25G1XCO5
Mixer
KitchenAid
4KB25G1XER3
Mixer
KitchenAid
4KB25G1XER5
Mixer
KitchenAid
4KB25G1XGA5
Mixer
KitchenAid
4KB25G1XMC5
Mixer
KitchenAid
4KB25G1XMY5
Mixer
KitchenAid
4KB25G1XOB3
Mixer
KitchenAid
4KB25G1XOB5
Mixer
KitchenAid
4KB25G1XTG3
Mixer
KitchenAid
4KB25G1XTG5
Mixer
KitchenAid
4KB25G1XWW3
Mixer
KitchenAid
4KB25G1XWW5
Mixer
KitchenAid
4KD2661XMC3
Mixer
KitchenAid
4KG25G0XMC4
Mixer
KitchenAid
4KG25G0XWH4
Mixer
KitchenAid
4KG25G7XER4
Mixer
KitchenAid
4KG25G7XOB4
Mixer
KitchenAid
4KG25G7XSL4
Mixer
KitchenAid
4KG25G7XWH4
Mixer
KitchenAid
4KG25H3XER5
Mixer
KitchenAid
4KG25H3XOB5
Mixer
KitchenAid
4KG25H3XSL5
Mixer
KitchenAid
4KG25H3XWH5
Mixer
KitchenAid
4KN15C1XER1
Mixer
KitchenAid
4KN15C1XMC1
Mixer
KitchenAid
4KN15C1XOB1
Mixer
KitchenAid
4KN15C1XWH1
Mixer