We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
February 8, 2023
One of my circuit protector lights will not reset and stays red. Should I buy the $37 circuit protector listed above? Is it easy to install?
For model number EB2800i
Hi Ken, thank you for your question! If your generator is flashing a red overload light and there is nothing plugged in, this is generally due to running it without load for too long. It commonly happens when you are running out of fuel. An overload indicator may flash when you are starting a device with a large startup current. This indicates that the generator is supplying your machine with more than its rated wattage (for a few seconds), and it is quite normal. If this is not the issue, you will need to replace the control panel, part number FIX12133994. We hope this helps, good luck with this repair!
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_5.gif "Part Location Diagram of 38240-Z11-A32 Honda Pri; Protector, Circuit (20A)")
_WW_5.gif "Part Location Diagram of 38240-Z11-A32 Honda Pri; Protector, Circuit (20A)")
