AP6030109, 12002144, 12002149, 71002253, 74004556, 74007227
...
Show more, 74008570, 74008576 Show less
Videos For installing this part.
Replacing your Dual Radiant Element with Limiter
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
January 4, 2023
Dual burner switch lites up for each burner but neither burner works. I assume the dual burner needs to be replaced. Is that correct?
Thanks
For model number CVE3401W
Hello Dennis, Thank you for your inquiry. You can test the dual element with a multimeter to make sure it is working properly. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
Was this helpful?
Thank you for voting!
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 5.0 / 5.0, 2 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
element has low and high sections. One was burned out.
unscrewed glass top (2 screws under glass top in front). Raise glass top, mark the letters noting the bracket scew holes used on broken element. I marked the wires and the terminals. I marked the same holes on the new element with a marker. I removed the brackets, and moved the wires from the old element to the new element on at a time.
... Read more I then placed the new element in, and secured the screws. It was finished in a matter of minutes.
Unplug appliance. Remove 2 philips screws under each corner of the stove top so you can lift it up. Lift the top and support it with a small board. Remove 2 nuts with 1/4" nut driver holding the element in place. Remove the wires one at a time from the old element and transfer them on the new element. I say one at a time so you don'
... Read moret forget which wire goes where. Bolt the new element back in place and you are go to go. Should take no more than 10 minutes. Super easy. Plug the appliance back in.
Read less
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11759488
Manufacturer Part Number: W10823709
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
