Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Washer Water Inlet and Valve Assembly
Works With Model 11020102311!
$87.01
In Stock
- Fix Number:
- FIX11757114
- Manufacturer #:
- WPW10683603
- Manufactured by:
- Whirlpool
Works With Model 11020102311!
- Product Description
- This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
- Works with the following brands:
- Whirlpool, Amana, Maytag, Kenmore
- Works with the following products
- Washer
- Fixes the following symptoms
- Leaking, No hot or cold water
- Part# WPW10683603 replaces these:
- AP6023768, W10423125, W10501149, W10683603, W10683680
Part Number Cross Reference
Product Description
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
-
Works with the following brands:Whirlpool, Amana, Maytag, Kenmore
-
Works with the following products:Washer
-
Fixes the following symptoms:Leaking, No hot or cold water
-
Part# WPW10683603 replaces these:AP6023768, W10423125, W10501149, W10683603, W10683680
Videos For installing this part.
Replacing your Washer Water Inlet and Valve Assembly
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Marianne from Plantsville, CT
- Parts Used:
- WPW10683603
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
The valve was stripped to the hot water inflow valve. It leaked continuously
I took off the control panel. Located the part in the back of the washer. Unplugged the original from the main console. Inserted the new part. Put the main console back on top of the washer. I went slow because I never did this before but if I had to do it again it would take about 30 minutes. Watch how everything is connected and just in
... Read more
stall.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Antonio I. from Trumbull, CT
- Parts Used:
- WPW10683603
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
no problem
just unplug the old part and plug the new one screw all the covers peces back plug and play done.Thanks for send me the wright part.
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Duane from Uniontown, PA
- Parts Used:
- WPW10683603
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set, Wrench set
cold water side of valve leaking
remove back of machine, remove part. unplug electricity and valve from circuit board. remove valve, prethread holes for screws before inserting part in machine. plug in part and put back on washer,make all connections then test for leaks, then run machine.
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Christopher G - June 11, 2021
Verified Purchase
Inlet valve
Part arrived quick and was simple to put on
Model Compatibility
This part works with the following models:
Fix Number: FIX11757114
Manufacturer Part Number: WPW10683603
Manufacturer Part Number: WPW10683603
Brand
Model Number
Description
✖
Mail-In Recycling Rebate