This part is usually located in the bottom of the washer next to the drive motor. It is used to control the drive motor speed as well as the direction for the spin and tumble actions during the cycle.
This part is usually located in the bottom of the washer next to the drive motor. It is used to control the drive motor speed as well as the direction for the spin and tumble actions during the cycle.
Works with the following brands:
Whirlpool, Maytag
Works with the following products:
Washer
Fixes the following symptoms:
Will Not Start
Part# WPW10374126 replaces these:
AP6020609, W10245123, W10374126
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ruth
September 24, 2021
How do I attach this part
For model number wfw94hexw1
Hello Ruth, thank you for writing. To access the motor control board, you will need to remove the back panel to gain access to it. It should be down on the bottom left corner. We strongly recommend you contact the manufacturer, as they may have this information in their system. We hope this helps.
Was this helpful?
Thank you for voting!
Model Compatibility
This part works with the following models:
Fix Number: FIX11753928
Manufacturer Part Number: WPW10374126
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.