11753379-1-M-Whirlpool-WPW10348269-Dishwasher Drain Pump

( Grid squares measure 1x1 inch )

11753379-1-S-Whirlpool-WPW10348269-Dishwasher Drain Pump

11753379-2-S-Whirlpool-WPW10348269-Dishwasher Drain Pump

11753379-1-S-Whirlpool-WPW10348269-Dishwasher Drain Pump 360 view

Dishwasher Drain Pump

Works With Model MDB7749SBQ0!

Rated by 11 customers

Really Easy

15 - 30 mins

Ratings submitted by customers like you who bought this part.

$91.96

Fix Number:: FIX11753379
Manufacturer #:: WPW10348269
Manufactured by:: Whirlpool

Works With Model MDB7749SBQ0!

Product Description: If there is still water left in your dishwasher after it has finished running, there may be an issue with your drain pump. The pump is designed to remove water from the tub, and if that is not happening then it could be due to damaged that is causing the motor not to run or a crack causing a leak. If a new pump is required, this is a genuine OEM replacement part. Completing this repair will be easiest if you pull the dishwasher out from under the cabinet. You will need to disconnect both the water and electrical supply to the appliance before starting.
Works with the following brands:: Whirlpool, KitchenAid, Kenmore, Maytag
Works with the following products: Dishwasher
Fixes the following symptoms: Not draining, Leaking, Noisy, Not cleaning dishes properly
Part# WPW10348269 replaces these:: AP6020066, 661662, 8558995, 8565839, W10084573, W10158351, W10348269, WPW10348269VP

1 Installation Video 1 Question and Answer 11 Installation Instructions Model Compatibility

Product Description Part Videos Questions and Answers Installation Instructions Model Compatibility

Product Description

If there is still water left in your dishwasher after it has finished running, there may be an issue with your drain pump. The pump is designed to remove water from the tub, and if that is not happening then it could be due to damaged that is causing the motor not to run or a crack causing a leak. If a new pump is required, this is a genuine OEM replacement part. Completing this repair will be easiest if you pull the dishwasher out from under the cabinet. You will need to disconnect both the water and electrical supply to the appliance before starting.

Works with the following brands:

Whirlpool, KitchenAid, Kenmore, Maytag
Works with the following products:
Dishwasher
Fixes the following symptoms:

Not draining, Leaking, Noisy, Not cleaning dishes properly
Part# WPW10348269 replaces these:

AP6020066, 661662, 8558995, 8565839, W10084573, W10158351 ... Show more , W10348269, WPW10348269VP Show less

Videos For installing this part.

Replacing your Dishwasher Drain Pump

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.

< Prev
1
Next >

Sort by:

Steven

January 8, 2022

My dishwasher won't drain. Also, no motor noise when I put dishwasher in cancel/drain mode. How do I know if it's the pump that bad or the controller?

For model number KDTE104ESS1 Kitchenaid

Hello Steven, Thank you for your inquiry. You can test the drain pump with a multimeter to see if it is causing the issue. We also recommend checking the drain filter, and the dishwasher pump and motor assembly, and check the wiring for any loose connections. Good luck with your repair.

2 people found this helpful.

Was this helpful?

Related Parts:

Dishwasher Pump and Motor Assembly

$259.22

Dishwasher Filter

$58.02

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.2 / 5.0, 11 reviews.

< Prev
1
2
Next >

Sort by:

Customer:: WILLIAM from MCKEES ROCKS, PA
Parts Used:: WPW10348269
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

Dishwasher not draining

This was one of the easiest jobs I ever did first I rremoved the excess water with a Shop-Vac then removed the kick plate two screws then removed the clamp from the drain hose pulled the electrical wiring off the pump removed the pump by turning it counterclockwise put the new pump in turning it clockwise it took less than a half-hour bu ... Read more

Read less

15 of 16 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Mark from Winnie, TX
Parts Used:: WPW10348269
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers

Water remaining in the bottom of dishwasher after cycle was completed

Cut the breaker off for the dishwasher. Removed the dishwasher drain line from the garbage disposal and used a wet/dry vacuum cleaner do vacate all the water from the dishwasher. I was able to look at new pump to see where the clip was located to push in so I could rotate old pump to get it out of housing. Before taking it out I removed ... Read more

Read less

8 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Mark from NEW PRT RCHY, FL
Parts Used:: WPW10348269
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

Dishwasher stopped draining

Remove cover plate from the bottom of the dishwasher. Move hose clamp out of the way. Unscrew dishwasher pump being careful not to pull on wires. Unplug wire harness. Plug wires into new pump. Reinstall pump and put hose clamp back in place. Reinstall cover plate.

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: steven from ATWATER, CA
Parts Used:: WPW10348269
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers, Socket set

Dish washer was not Discharging water

Pulled the dishwasher out laid it on the floor

Remove the old pump install the new pump by hand no tools required

Re installed dishwasher

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Thomas from Morrisville, NY
Parts Used:: WPW10348269
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

faulty drain pump

removed bottom cover. Unclipped drain pump and wire. Installed new one. 15 minutes.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: andrew from bethesda, MD
Parts Used:: WPW10348269
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

water won't drain and unit not running

it took a great effort to turn the pump - counter clock wise- to disconnect the pump from housing. after few trial it finally came lose.when the pump drop lower you can easily disconnect the wire from the unit. put down a tray under the pump so water will not running under the washer. the problem started when some how the pump is loose an ... Read more

Read less

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Matthew from Sunrise, FL
Parts Used:: WPW10348269
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers, Wrench (Adjustable)

Dishwasher would not drain

Found this site and discovered the most common cause of a dishwasher failing to drain was a faulty drain pump. I ordered a new one from partselect.com. It arrived very quickly. The DIY video was extremely informative and made replacing the drain pump super easy; however, after installation I was still having the same problem. Of course, i ... Read more

Read less

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Gavin from Lanoka Harbor, NJ
Parts Used:: WPW10348269
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

unit not draining

followed your instructions from the e-mail you sent me... Thank You Very Much !

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Ken from Atlanta, GA
Parts Used:: WPW10348269
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver

does not drain

The online videos and other commenters have described very well how to complete this repair. The only thing I wish had been suggested was to first be sure the drain hose was not clogged!

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jerry from Perry, MO
Parts Used:: WPW10348269
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers

Dish washer was not draining

Ordered a drain pump and installed it , but would not drain.Found the hose was clogged. cleaned it out and worked fine left the new pump in due to the age of the dishwasher.

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

< Prev
1
2
Next >

Model Compatibility

This part works with the following models:

Fix Number: FIX11753379
Manufacturer Part Number: WPW10348269

Kenmore

66213032K112

Dishwasher - Dishwasher

Kenmore

66213273K112

Dishwasher - Dishwasher

Kenmore

66512093K210

Dishwasher - UNDERCOUNTER DISWASHER

Kenmore

66512413N410

Dishwasher - DISHWASHER

Kenmore

66512413N411

Dishwasher - DISHWASHER

Kenmore

66512723K310