Part Location Diagram of WPW10314173 Whirlpool Dryer Drum Support Roller
See part 21 in the diagram
Replacing your Whirlpool Dryer Dryer Drum Support Roller
( Grid squares measure 1x1 inch )

Dryer Drum Support Roller

Works With Model WED9051YW1!

Rated by 3 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$22.69
In Stock
Fix Number:
FIX11752609
Manufacturer #:
WPW10314173
Manufactured by:
Whirlpool
Works With Model WED9051YW1!

Product Description

This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the drum roller only and does not include the tri-rings. This part is sold separately. Most dryers require two drum rollers. It is recommended to check and replace both drum support rollers at the same time to ensure proper drum rotation and because they often wear at the same rate. The drum support roller holds the drum in the proper position while it spins on the support wheels. If rollers are worn out, they will cause the dryer to be noisy.

Videos For installing this part.

Replacing your Dryer Drum Support Roller

Replacing your Dryer Drum Support Roller

Replacing your Dryer Drum Support Roller

Replacing your Dryer Drum Support Roller

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Abraham
January 15, 2024
Will this roller fit on a Kenmore dryer model# 11097094300
For model number 11097094300
Fix.com logo
Hi Abraham, Thank you for writing. The Dryer Drum Support Roller for this model is listed as Fix Number: FIX11752609. Good luck with the repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Gerfie
July 27, 2022
my question is..can this drum.roller from Whirlpool be usd with my LG 27 inch steam dryer?
For model number Dlex8377nm
Fix.com logo
Hello Gerfie, Thank you for your inquiry. We have researched the model number you have provided and do not show this part as compatible. The compatible part number is FIX12749664. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.0 / 5.0, 3 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
JAMES from GREENSBURG, PA
Parts Used:
WPW10512946, WPW10314173, W10120998
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Loud squeaking and squealing
Lint Filter - Removed old lint filter and inserted new lint filter. This is the first time I tried to fix a dryer. A handyman I am not. I found two very useful YouTube videos using basically my model of Kenmore (11067851600). Disassembly/Assembly - here is a difference between Kenmore 29" wide dryers and 27" wide dryers. Mine is 27". My e ffort was not a smooth as these videos. The bottom front panel's right most clip was quite troublesome. The moisture sensor wire required needle nose pliers to be disconnected and reconnected. The open door sensor was not easy to disconnect. Although with a few special magic words it came apart. The upper front panel was held in place with two T20 Torx screws. I had only had a T15 driver, therefore a trip to Home Depot was required. The first two tri rings were not easily removed, however, on third tri ring it became easier and not damaged. Replacement of tri rings was not troublesome. Support rollers snapped in place easily. However, I did thoroughly clean the housing. It was quite grimy. Actually, while I had the dryer open I cleaned everything including the heating element and electric motor. It now operates quietly. It took me a little over two hours because I am not handy and must take care not to make matters worse plus I thoroughly cleaned everything include scuff marks where the drum rubs. Anyone else probably should have it completed 30-60 minutes easily.
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alfred from CANASTOTA, NY
Parts Used:
WPW10512946, WPW10314173
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Replace Dryer Drum Support Roller
1. Removed the lint trap
2. Remover the two screws holding the lint trap duct to the top
3. Using a putty knife pop the two front retaining clips holding thew top to the front of the machine
4. Lift Top and rest against back wall
5. Remove two retaining screws at the bottom of each side of the panel
6. Lean front panel out, lift-up, remove and set aside
7. Grasp belt tension pulley and release tension on drum belt
8. Remove belt from drum
9. Slide drum out from machine
10. Remove and replace two Drum Support Rollers and four roller support tri-rings.
11. REASSEMBLE IN REVERSE ORDER
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scott from SARATOGA, WY
Parts Used:
WPW10512946, WPW10314173, WPW10198086
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
The dry would squeal " LOUDLY" with a load of cloths, when first started.
The drum would turn while it was on so knew the belt was not broke. But figured while I had it opened up, I would just change it. Hey.....what's another $15.00.

After getting the dryer apart, The rollers (2) would not turn by hand. So knew then that had to be the issue. Removed them and wiped them clean and put just a small dro p of oil on the roller shafts. They spun freely. Put it back together and it was quite.

I had ordered 4 Tri-Ring washers not realizing that 2 came with each roller. Returned them hassle free.

Also vacuumed it out as there was some lint.

It would an easy fix had I had two good knees. Their videos really helped me out. Glad they took the time to send them.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11752609
Manufacturer Part Number: WPW10314173
Brand
Model Number
Description
Kenmore
10687884100
Dryer
Kenmore
10687884300
Dryer
Kenmore
10687884600
Dryer
Kenmore
11060052990
Dryer
Kenmore
11060052991
Dryer
Kenmore
11060056990
Dryer
Kenmore
11060056991
Dryer
Kenmore
1106007299
Dryer - Kenmore Dryer Model 110.6007299 (1106007299, 110 6007299) Parts
Kenmore
11060072990
Dryer
Kenmore
11060072991
Dryer
Kenmore
11060092990
Dryer
Kenmore
11060092991
Dryer
Kenmore
11060094990
Dryer
Kenmore
11060094991
Dryer
Kenmore
11060096990
Dryer
Kenmore
11060096991
Dryer
Kenmore
11060097990
Dryer
Kenmore
11060182000
Dryer
Kenmore
11060372710
Dryer - Dryer
Kenmore
1106090199
Dryer - Kenmore Dryer Model 110.6090199 (1106090199, 110 6090199) Parts
Kenmore
11060901990
Dryer
Kenmore
1106090299
Dryer - Kenmore Dryer Model 110.6090299 (1106090299, 110 6090299) Parts
Kenmore
11060902990
Dryer
Kenmore
11060904990
Dryer
Kenmore
1106090799
Dryer - Kenmore Dryer Model 110.6090799 (1106090799, 110 6090799) Parts
Kenmore
11060907990
Dryer
Kenmore
11060912990
Dryer
Kenmore
1106092299
Dryer - Kenmore Dryer Model 110.6092299 (1106092299, 110 6092299) Parts
Kenmore
11060922990
Dryer
Kenmore
11060924990
Dryer