Accumulator Filter

Watched your video and did just as presented in video. Really simple repair

The inside parts were covered in calcium and lime, so I wanted to remove everything, give it a thorough scrub down and put back together. When I got to the filter is was so bad I felt it best to replace it. I got stuck with the last two screws because I couldn't see them, covered in debris! We figured it out though and the whole process w ... Read more as very easy, the video really helped! Thanks for the fast delivery.

My dishwasher is mocking me. I had a lot of dirty, white, standing water in the basin at the end of the cycle. I was unable to drain using the drain feature. I removed the inner parts looking for blockages, found some, removed the debris. I also found that the impeller was damaged. I ordered a new impeller and installed, but the issue ... Read more persisted. As I continued to troubleshoot, I observed that the dishwasher would drain if all the inner parts were removed, but not when assembled. Thinking it may be due to the accumulator filter being clogged, I replaced that part as well. The situation is much improved, but still present. The repair is very easy, a matter of removing all of the screws (you will need a star tip driver, 2 sizes. Why all the screws cannot use the same size is beyond me, only the impeller requires a different size), changing out the part and reassembling.

Followed your easy instruccions step by step.Job was not very easy for me but I tested the dishwasher after I finished and it worked like new Thank you.