11747779-1-M-Whirlpool-WP99003605-Inlet/Outlet Bezel
Part Location Diagram of WP99003605 Whirlpool Inlet/Outlet Bezel
See part 3 in the diagram
11747779-1-S-Whirlpool-WP99003605-Inlet/Outlet Bezel 360 view
( Grid squares measure 1x1 inch )
11747779-1-S-Whirlpool-WP99003605-Inlet/Outlet Bezel 11747779-2-S-Whirlpool-WP99003605-Inlet/Outlet Bezel 11747779-3-S-Whirlpool-WP99003605-Inlet/Outlet Bezel 11747779-1-S-Whirlpool-WP99003605-Inlet/Outlet Bezel 360 view
Part Location Diagram of WP99003605 Whirlpool Inlet/Outlet Bezel

Inlet/Outlet Bezel

Works With Model MDD8000AWS2!

Rated by 3 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$21.90
In Stock
Fix Number:
FIX11747779
Manufacturer #:
WP99003605
Manufactured by:
Whirlpool
Works With Model MDD8000AWS2!
Product Description
This is an inlet/outlet bezel, also known as the air duct bezel, is for your dishwasher. It covers the vent openings in the dishwasher and prevents the dishwasher from leaking. It is gray in color and is approximately 4 inches in diameter. If the bezel is damaged, or the tabs holding in place are broken, you may need to replace it. Many of our customers have described this repair as easy. This is an authentic OEM part sourced directly from the manufacturer.
Works with the following brands:
KitchenAid, Kenmore, Whirlpool, Maytag
Works with the following products
Dishwasher
Fixes the following symptoms
Leaking, Not cleaning dishes properly
Part Number Cross Reference
Part# WP99003605 replaces these:
AP6014539, 6-919693, 99003605
1 Question and Answer 3 Installation Instructions Model Compatibility
Product Description Questions and Answers Installation Instructions Model Compatibility

Product Description

This is an inlet/outlet bezel, also known as the air duct bezel, is for your dishwasher. It covers the vent openings in the dishwasher and prevents the dishwasher from leaking. It is gray in color and is approximately 4 inches in diameter. If the bezel is damaged, or the tabs holding in place are broken, you may need to replace it. Many of our customers have described this repair as easy. This is an authentic OEM part sourced directly from the manufacturer.

  • Works with the following brands:
    KitchenAid, Kenmore, Whirlpool, Maytag
  • Works with the following products:
    Dishwasher
  • Fixes the following symptoms:
    Leaking, Not cleaning dishes properly
  • Part# WP99003605 replaces these:
    AP6014539, 6-919693, 99003605

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Holly
December 11, 2023
I have 2 grey, 4" circular pieces on the inside of my kitchen aid drawer dishwasher. Both have broken off, broken tabs. No longer stays in place. Drawer has anlso started leaking. Are these 2 the same part, or is the top one different from the bottom one? . Also, the circular filter piece is missing from the area these pieces cover. Do I need to replace that as well? I believe the piece is a BEZEL inlet/outlet. AP6014539. I just need to know if the top and bottom pieces are the same. Both need replaced. Thank you.
For model number KUDD03STPA10
Fix.com logo
Hi Holly, thank you for getting in touch. Based on our research, the part you are referring to is the same for the top and the bottom. Also, the circular filter piece you are referring to is part number FIX11750862. Please submit a new question if you have any follow-ups!

Was this helpful?
Thank you for voting!
Related Parts:
FILTER-PLT
$132.60
Special Order

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.8 / 5.0, 3 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Jeff from Santa BArbara, CA
Parts Used:
WP99003605
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The old Bezel broke off from the receiving bracket, inside of the tub.
Place new part,so it is flush with the inside wall over the receiving bracket it was located.Looking down at the part,apply pressure/push, while turning it clockwise,until it stops/locks on .Wah-La...you're done!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
adam from black mountain, NC
Parts Used:
WPW10286124, 99003715, WP99003605
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Leaking during cycle from front
Note: this is a 2 drawer dishwasher. The front bezels/vents broke at the tab which locks in the module and compresses the seal. Remove the front panel starting with 2 screws on the bottom front. Pull front panel down to unlock and pull away. The next set of screws are fairly obvious, remove that layer of shielding. Not you can see th e turbine looking vent module. There is one screw attaching it to the drawer, remove it, and disconnect 2 wires at the top. Now that module can be pulled away. Clean the sealing surface on the drawer and the module. Clean or replace the seal. Inspect the locking grooves to insure they are clear, the bezel tabs break off in those grooves. Reinstall module and lock in place with new bezel, move it around a bit to insure good seal. Reassemble in reverse. Note: there are 2 vents per drawer 4 total on machine, I would replace all 4 as they will most likely soon fail for the same reason.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from San Antonio, TX
Parts Used:
WP99003605
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Filter cover on inside front wall broken
Removed 2 small broken pieces that remained ( using Hemostat). Inserted new filter cover which screws in clockwise.... Very simple.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11747779
Manufacturer Part Number: WP99003605
Brand
Model Number
Description
Kenmore
46513322600
Dishwasher
Kenmore
46513323600
Dishwasher
Kenmore
46513329600
Dishwasher
Kenmore
46513333600
Dishwasher
Kenmore
46513339600
Dishwasher
Kenmore
46513342600
Dishwasher
Kenmore
46513343600
Dishwasher
Kenmore
46513349600
Dishwasher
Kenmore
665133225
Dishwasher
Kenmore
66513322K605
Dishwasher
Kenmore
665133235
Dishwasher
Kenmore
66513323K605
Dishwasher
Kenmore
665133295
Dishwasher
Kenmore
66513329K605
Dishwasher
Kenmore
665133335
Dishwasher
Kenmore
66513333K605
Dishwasher
Kenmore
665133395
Dishwasher
Kenmore
66513339K605
Dishwasher
Kenmore
665133425
Dishwasher
Kenmore
665133426
Dishwasher
Kenmore
66513342K605
Dishwasher
Kenmore
66513342K606
Dishwasher
Kenmore
665133435
Dishwasher
Kenmore
665133436
Dishwasher
Kenmore
66513343K605
Dishwasher
Kenmore
66513343K606
Dishwasher
Kenmore
665133495
Dishwasher
Kenmore
665133496
Dishwasher
Kenmore
66513349K605
Dishwasher
Kenmore
66513349K606
Dishwasher