Oven Igniter

Turned off the gas to the appliance. Removed oven from existing location. Unplugged oven. Supported the oven door while I removed the shelves, and burner covers. Unscrewed the igniter, found which of the two wires went to the gas proportioning valve. Unplug it and tire a string to it. You have to remove a plate at the back of the oven as ... Read more the other wire lead goes to the upper igniter. Unplug it. gently pull the wires with the existing igniter. Remove the string from the wires and tie it to the new ones. Gently pull the string from the back of the oven. Secure the wires to the existing ones. Secure the back plate. Secure the igniter. Turn on the gas and plug the oven in. Turn the oven on with the door closed to make sure it works. If it works, turn off the oven and put oven back in place.

Repair was fairly easy. It required pulling the oven out to access the back. Removal of two screws on the back to remove a plate to access wires. Inside the oven it required the removal of the heat displacer to access the the igniter. It was a few screws removed for that. Once it was all apart all that was needed was to swap out the part ... Read more and put it all back together. I did watch a you tube video that explained a couple of things I didn't know.