Nut

The lip on the front of the bar had to be bent so it was almost straight out so a wrench could be put on the nut to remove the old roller. There was not room enough to get on the nut with pliers or wrench and turn it. much more difficult than the instructions laid out.

In replacing the old partial rusted drawer slides had rusted screw with nuts that spun had to drill them out and replaced front larger bolt and nut the rear screw used a larger sheet metal screw. The wheels and bearing with on easy the instructions showed a modification to remove a tab for the different wheel assembly and installed just ... Read more like the instructions. When done the drawer will slide out with just touch of your foot on open tab GREAT!! I was looking at buying a new compactor the repair saved me about 700 $. Thanks a lot. Never had a trash Compactor before this great and it keeps my puppy out of trash.