Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Knob - Chrome
$16.76
In Stock
- Fix Number:
- FIX11744713
- Manufacturer #:
- WP7737P245-60
- Manufactured by:
- Whirlpool
- Product Description
- This is an OEM chrome control knob, measuring approximately 1-1/2 inches in diameter. This control knob either controls the speed of the cooktop fan or the heat of the burner. This knob is compatible with D-shaped shafts. This is a simple and tool-free repair, just pull the knob off the shaft and place the new one into place. This is a good opportunity to inspect all the knobs on your appliance to maintain a consistent appearance. Each knob is sold separately.
- Works with the following brands:
- Jenn-Air, KitchenAid
- Works with the following products
- Cooktop
- Fixes the following symptoms
- Element will not heat, Will Not Start, Touchpad does not respond
- Part# WP7737P245-60 replaces these:
- AP6011516, 74007918, 7737P245-60, WP7737P245-60VP
Part Number Cross Reference
Product Description
This is an OEM chrome control knob, measuring approximately 1-1/2 inches in diameter. This control knob either controls the speed of the cooktop fan or the heat of the burner. This knob is compatible with D-shaped shafts. This is a simple and tool-free repair, just pull the knob off the shaft and place the new one into place. This is a good opportunity to inspect all the knobs on your appliance to maintain a consistent appearance. Each knob is sold separately.
-
Works with the following brands:Jenn-Air, KitchenAid
-
Works with the following products:Cooktop
-
Fixes the following symptoms:Element will not heat, Will Not Start, Touchpad does not respond
-
Part# WP7737P245-60 replaces these:AP6011516, 74007918, 7737P245-60, WP7737P245-60VP
Videos For installing this part.
Replacing your Knob - Chrome
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- David from Edina, MN
- Parts Used:
- WP7737P245-60
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Knob support was cracked due to age
Piece of cake to replace
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- christine from new city, NY
- Parts Used:
- WP7737P245-60, WP7733P410-60
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Needed new knobs
Easy looks great
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kim from Cenntennial, CO
- Parts Used:
- WP7737P245-60, WP7733P410-60
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
needed new knobs for cooktop
Found everything very here and was sure that I had the correct parts. They came to me promptly. I am very pleased.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- dante from west chester, PA
- Parts Used:
- WP7737P245-60, WP74010783
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
The control know for the 3 stage fan unit and the switch itself needed replaced.
step 1 Disconnect electric/ step 2 shut off gas line then disconnect/ step 3 disconnect vent on blower from the hvac line out of building/ step 4 lift cooktop completely out and sit upright on ground/ step 5 remove all phillips head screws connecting the glass top to the metal housing of the unit/ step 6 (with a manual phillips head scr
... Read more
ew driver) remove the screws holding the metal burners to the cooktop, there are 2 screws per burner, once screws are removed disconnect electric ignition chord from the bottom of the burner/ step 7 (2 man effort) lift glass top and disconnect fan switch, one at a time remove the electric leads and reconnect to the new switch, mount switch in housing it will snap into place/ step 8 reconnect all electric leads and screw unit back together/ step 9 after reinstalling cooktop into counter simply place chrome knob on new switch and test function. Entire process should take 1.5 hours for 2 workers.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Betty from Auburn, KS
- Parts Used:
- WP7737P245-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Two of the knobs were cracked at the base.
Just put the new knobs on properly and all was working once again!
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Lisa J - April 21, 2020
Verified Purchase
I’ve ordered from fix.com a few times
Product fit perfect-
Model Compatibility
This part works with the following models:
Fix Number: FIX11744713
Manufacturer Part Number: WP7737P245-60
Manufacturer Part Number: WP7737P245-60
Brand
Model Number
Description
✖
Mail-In Recycling Rebate