Bake Element

1. Turned off the electricity. 2. Removed the screws holding the old baking element in place in the back wall of the oven. 3. Pulled the element toward the front of the oven. 4. Used a screwdriver to slowly pry the wire clips, attached to the prongs on the element, toward the top of the oven. 5. Removed the old element, put the new one i ... Read more n place and slid the clips down over the prongs of the new baking element. 6. Slid the element prongs into the back wall of the oven and replaced the screws. 7. Turned the electricity back on.

I unhooked the wiring clips from the old element removed it and attached the clips to the new element put it back in place and done

First I turned power supply off at the breaker panel, then I unscrewed the two screws holding element in place and removed element. then I inserted new element and reattached screws to secure element. Turned breaker back on and repair was complete and oven working condition restored.

Replaced both bake and broil elements. It works now.