Drum Roller Shaft Washer

Take time to examine your machine before ordering parts, I did not need to expensive roller wheel kits , I needed two washers for the roller wheels. I pulled it apart and used the snap ring pliers to pull the roller wheels off,put the washer behind the wheel , I added a dab of hi temp grease to inside of roller and shaft. Put it back to ... Read more gether. Quite as a new one. . The rest of the parts are straight forward . . Good luck

I removed the front cover, the front drum support frame and then the drum.belt and drum. Next I removed both drum roller assemblies. The drum roller bearings had failed and the drum roller pins were worn undersize. I replaced both roller pins and rollers. I assembled the rollers complete on the bench and then installed the assemblies. Th ... Read more e direction sheet which comes with the rollers was helpful in the placement of the fiber washers which is an upgrade from original..The drum, a new belt, front drum support and the front cover were replaced to complete the job. total time 2 hours..

I just followed the videos. Couldn't have done it without the video showing me how to do it. I've never worked on the dryer before my life but this made it easy. thank you

Follow the video and was too easy.