V-Style Drive Belt (32.5 inches long)

Took two screws out of front panel on bottom allows you to take the front cover off. Then removed four screws from the motor to be able to lift up and get to the bottom of the drain pump that has three screws holding it on, these are torque head screws. When pump is unbolted pump slide off and replaced belt,make note how belt is ran befo ... Read more re taking off , now you can put new drain pump on and and hold in place while you get belt back on. Now you can bolt everything back the way you took off.

Removed the front cover by taking out two screws at the bottom. Lift the front out and up and springs that hold it will come loose. Took the water pump that empties the tub loose and removed the belt that turns it. Took the tension spring loose. Removed the old belt and replaced it. Replaced the belt to the pump and tightened the pump. Re ... Read more placed the tension spring. Checked it out running before I replaced the front cover.