Circulation Pump with Motor

Easy, as described in a previous post. Double check that the connector to the wire harness is not corroded and that the pins have not fallen off though. We encountered this problem and had to splice with weatherproof connectors the blue, green and white wires while bypassing the connector.

Did what the other guys did. Not hard. Just take your time, get a pad for your knees, and clean the parts you take out as you go. Used a lot of CLR in the process. Worked perfect. Don't freak out if the electrical connection doesn't come off easily. Just work it and be firm. It'll come off. Oh, and I discovered my pump only had tw ... Read more o mounting screws. One wasn't even in there. It works fine if you secure the one in the back and the near right. The hard to get one in the far back right..., it's up to you but it doesn't seem to make any difference. It was all snugged up after without it.