Dual Water Inlet Valve

Very easy after watching the instruction/install video the company put on U-tube. Got the part mailed to me within 2 working days. Very pleased with the product, the company and the instructions.

I watched Part select repair video. Part was received in one day. Unplugged electric, shut off water, disconnected the hoses, marked the hot hose. Remove the back cover around the hoses inlet with my Nut driver to gain access, disconnected the solinoid and remove the small hose connected to valve. Job was easy and good support videos fro ... Read more m this site.

I watched the videos. Wasn't sure if I needed dual water inlet valve or water level pressure switch, so I installed both. They solved the problem. Great web site and useful videos.The knob was installed as well with the help of the video.

Replaced water inlet valve per instructions in video. Easy. Also changed hoses as they were gettting to be nine years old. Wondered about putting a $50 part on a 9 year old $300 washing machine, but did it anyway. Works great now. See how long the rest of the machine lasts. Part # PS1155105.

As described in the video's so thoughtfully provided by this site. Parts showed up within two days and appeared to be OEM. Well done . You've earned my future business and referrals.

Replaced Dual Water Inlet Solenoid Valve: Disconnect water lines and power (remember to close water supply valves); remove 3 screws along back of top edge of control panel; lay control panel face down on machine cover; disconnect solenoid electrical connections (2); remove 2 screws on Dual Water Inlet; disconnect water outlet hose and cla ... Read more mp; replace new Dual Water Inlet Valve and connect in reverse order.

1. Turn off power and water supply to washer. 2. Remove hot and cold hoses from washer. 3. Remove 4 hex screws from rear of control panel. 4. Remove star screws from the top of control panel and remove cover. 5. Remove 2 screws holding the water intake valve assembly. Note: The hot and cold intake ports on the valve assembly are con ... Read more trolled by two separate solenoid valves. 4. After removing the water intake valve assembly, replace with new water intake assembly. 5. Reattach control panel. 6. Reattach water hoses and plug in washer. 7. Turn on water supply lines. Ready to go!

easy repair. Just as described in repair video. mine had a foam insulation pad around the valve that I replaced with the new valve.

When living in the Chicagoland area this was a once a year replacement. The Washer was on the back porch and when the winter came the inlet valve would freeze water inside then when thaw would bust and leak. I would start with a torx wrench and undo the control panel forward. Then take a Philips screwdriver unscrew the water inlet valve. ... Read more Use a pair of Chanel locks to remove the water lines. Replaced with a new inlet valve in reverse order.

watched how to video. A piece of cake.