10243458-1-M-Campbell Hausfeld-SKN06200AV-Trigger Valve O-Ring Kit
Part Location Diagram of SKN06200AV Campbell Hausfeld Trigger Valve O-Ring Kit
See part 52 in the diagram
( Grid squares measure 1x1 inch )
10243458-1-S-Campbell Hausfeld-SKN06200AV-Trigger Valve O-Ring Kit Part Location Diagram of SKN06200AV Campbell Hausfeld Trigger Valve O-Ring Kit

Trigger Valve O-Ring Kit

Works With Model NS219500!
$ 3.99
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10243458
Manufacturer #:
SKN06200AV
Manufactured by:
Campbell Hausfeld
Works With Model NS219500!

Product Description

This authentic OEM part has been sourced directly from Campbell Hausfeld. This kit of o-rings includes all of the part you will need to tune-up the trigger valve in your nail gun. Due to the fact o-rings are made of rubber over time they will begin to wear down and become less effective. This means you could have air leaking from your trigger valve, at which point your trigger could lose function and your nail gun would stop shooting nails. When installing new o-rings be sure to properly lubricate them. Before you begin this repair remove the magazine, it will allow you better access to the trigger valve.

  • Works with the following brands:
    Campbell Hausfeld
  • Works with the following products:
    Nailer