Short Bottom Door Seal

Undo the 8 screws that hold on the inside panel of the door. It might be enough to just undo the two lower screws, and pull the panel up slightly. Slide the old seal out of its track and slide the new one back in in the same orientation. This can be a bit tricky depending on how dirty the seal is but not too difficult. In reassembling the ... Read more door, there is an acoustic damper in the middle of the door that needs to be laid flat, and a box inside the left top corner (as you face the outside of the door) that needs to be fitted back in the correct orientation. Put the 8 screws back in and you are done.