Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Electronic Control Board
Works With Model GHW9150PW4!
$457.63
In Stock
- Fix Number:
- FIX10064572
- Manufacturer #:
- W10756692
- Manufactured by:
- Whirlpool
Works With Model GHW9150PW4!
- Product Description
- This part helps with the tumble and spin cycle. If your motor won't run in either the wash or rinse cycle or if the fuse on the board is blown, then you have to replace this part. The fuse is not sold separately. NOTE: Motor is sold separately.
- Works with the following brands:
- Kenmore, Whirlpool, KitchenAid, Maytag
- Works with the following products
- Washer
- Fixes the following symptoms
- Will Not Start
- Part# W10756692 replaces these:
- AP5956390, 8181693, 8181693R, 8182679, 8182705, 8182706
Part Number Cross Reference
Product Description
This part helps with the tumble and spin cycle. If your motor won't run in either the wash or rinse cycle or if the fuse on the board is blown, then you have to replace this part. The fuse is not sold separately. NOTE: Motor is sold separately.
-
Works with the following brands:Kenmore, Whirlpool, KitchenAid, Maytag
-
Works with the following products:Washer
-
Fixes the following symptoms:Will Not Start
-
Part# W10756692 replaces these:AP5956390, 8181693, 8181693R, 8182679, 8182705, 8182706
Videos For installing this part.
Replacing your Electronic Control Board
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- John from Shrewsbury, MA
- Parts Used:
- W10756692
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Having f11 error
Took bottom washer panel off disconnect the cables to the board. Maneuvered the motor control bd out and replaced with the new control bd and connected all cables. No more f11 error
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bret from South Haven, MI
- Parts Used:
- W10756692
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Error Code F-06 Motor Control Unit
Remove lower panel on front of washer. MCU is on lower left. Open access door on end of box & remove wires. Release box by pressing with a flat blade screwdriver on tab on one of the front mounts and slide box forward. Remove one screw on the pump so old box can be removed and new one inserted. Reconnect wires and pump mount and its done
... Read more
. Hardest part was figuring out the releases on the wiring plugs. Total time 45 minutes. Could probably do a second time in 20 minutes.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX10064572
Manufacturer Part Number: W10756692
Manufacturer Part Number: W10756692
Brand
Model Number
Description
✖
Mail-In Recycling Rebate