Watch the install video
10033966-1-M-Yard Machines-946-04661A-Control Cable, 37.58", 148Cc Engine
Part Location Diagram of 946-04661A Yard Machines Control Cable, 37.58
See part H-34 in the diagram
Replacing your Yard Machines Lawn Mower Control Cable, 37.58", 148Cc Engine
( Grid squares measure 1x1 inch )
10033966-1-S-Yard Machines-946-04661A-Control Cable, 37.58", 148Cc Engine 10033966-2-S-Yard Machines-946-04661A-Control Cable, 37.58", 148Cc Engine Part Location Diagram of 946-04661A Yard Machines Control Cable, 37.58 Replacing your Yard Machines Lawn Mower Control Cable, 37.58", 148Cc Engine

Control Cable, 37.58", 148Cc Engine

Works With Model TB230!
$ 12.99
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10033966
Manufacturer #:
946-04661A
Manufactured by:
Yard Machines
Works With Model TB230!

Product Description

This is an authentic 51-inch control cable for walk-behind lawn mowers. This part is made up of a metal wire cable with a Z-type bent end on either side, and a 37.5-inch rubberized outer cover. When the control handle is released, the control cable stops the blade. If the cable breaks, the brake will not release even after pressing the lever. To remove the old cable, cut off any cable ties, remove the cable end from the control bail, and remove the control cable from the engine (you may need pliers). Remove the cables from the openings on the handle, which can be twisted off by rotating the cable at a 90-degree angle.

  • Works with the following brands:
    Yard Machines, Troy-Bilt, MTD, Cub Cadet
  • Works with the following products:
    Lawn Mower
  • Part# 946-04661A replaces these:
    946-04661A