Male Adapter

This is a genuine male adaptor, sold individually. This male adaptor attaches to the female hose connector on your pressure washer. This black plastic adaptor is located inside the hose connector and fastens it to the pump, allowing the connector to rotate. As you use your pressure washer, the adaptor can begin to wear and can eventually break. This is a quick and easy repair, that begins by removing the inlet filter from the hose connector, then use a hex socket to remove the male adaptor and the O-ring. Install the O-ring onto the male adaptor and connect the male adaptor into the female connector. This assembly can now be installed onto the pump, and the inlet filter can be re-installed.