Part Location Diagram of W10612022 Whirlpool Rear Drum Felt Seal
See part 35 in the diagram
Replacing your Whirlpool Dryer Rear Drum Felt Seal
( Grid squares measure 1x1 inch )

Rear Drum Felt Seal W10612022

Works With Model AED4475TQ1!
★★★★★
★★★★★
1 Review

Rated by 5 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$64.63
In Stock
Fix Number:
FIX8691753
Manufacturer #:
W10612022
Manufactured by:
Whirlpool
Works With Model AED4475TQ1!

Product Description

This is a genuine OEM replacement rear drum seal for your dryer. This seal is made of felt and comes with the adhesive required for installation. The purpose of the seal is to prevent hot air from escaping the drum while the dryer is operating. If you notice that it is taking too long for your laundry to dry, that marks are left on your laundry, or the machine is noisy or will not tumble, then you may need to replace the seal.

Videos For installing this part.

Replacing your Rear Drum Felt Seal

Replacing your Rear Drum Felt Seal

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

View More View Less
Multi Rib Belt - 92-1/4"
$17.17
In Stock
Maintenance Kit
$37.44
In Stock
Rear Drum Support Roller Kit
$14.36
In Stock
Two-Piece Split Ring Bearing
$58.67
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.4 / 5.0, 5 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
David from Kalamazoo, MI
Parts Used:
W10612022
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Drum felt seal came off and was pinched between the drum & back panel
Unplugged the unit, Removed the top, front panel and drum. Cleaned the old glue from the drum and fitted the new felt seal. I then glued the new seal in place in sections of approximately 15 to 20 % of the drum diameter. I clamped the felt seal in place for 5-10 minutes and continued the process around the diameter of the drum. I let the glue dry & reinstalled the drum, its belt and idler pulley. I reinstalled the front panel and used a common table knife to make sure the drum seal was properly seated; turning the drum counter clockwise. Once seated, I reinstalled the top & filter; turned the dryer on and relished in the silence. I spent more time than needed but that was my choice. Piece of cake!
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from San Antonio, TX
Parts Used:
W11035878, W10612022
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Noisy operation
I removed the screws at the lint filter then released the fasteners at the front to allow me to open the top cover. I then unplugged the door switch and removed the 2 screws at top of front cover and removed the front. I then lifted the drum out of the dryer and removed the rear drum felt seal per instructions included with part. then glu ed the new seal to the rear of the drum. allowed the glue to dry (about 30 minutes) while waiting for the glue to dry I replaced the front felt bearing and seal. re-assembled the dryer and tested. Wow what a difference. I also watched both videos available on the site for the repairs I was making. Suggest when replacing the rear seal that you glue about 2 feet around and wait for the glue to set up (about 10 minutes) then install the remainder of the seal and glue in place.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Clearwater, FL
Parts Used:
W10612022
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
worn out drum seal causing scrapping noise
followed a you- tube video. it was very simple to follow and the instructor in the video covered every step.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Timmy from pearl river, LA
Parts Used:
W10612022, WP90296, 4392065
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
eating socks
Replaced the felt rollers and belt and it works like new
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mike from Bowling Green, OH
Parts Used:
W11035878, W10612022, WP22002263, WP691366, 349241T
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
drum making load noise when turned on
I removed drum from cabinet and noticed one of the drum support rollers was froze to spindle and wore down in one spot. Both front and rear drum seals were also worn. I ordered the parts and they arrived in 2days. The front drum seal was easy to install but not so much for the rear seal. I installed the rear seal before gluing bye clampin g the seal every foot with 6inch clamps, 5 total and then start gluing and moving the clamps, to one side. as needed. I have done several of these now and this is the best way I've found. Support rollers are easy just need a pair of pliers and a small flat head screw driver. Installing the belt over the drum bye yourself is not easy but can be done. There are several videos online that are a big help.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX8691753
Manufacturer Part Number: W10612022
Brand
Model Number
Description
Kenmore
1106012510
Dryer - ELECTRIC DRYER
Kenmore
1106012990
Dryer - Kenmore Dryer Model 110.6012990 (1106012990, 110 6012990) Parts
Kenmore
11060222511
Dryer - ELECTRIC DRYER
Kenmore
11060522900
Dryer
Kenmore
11060602990
Dryer
Kenmore
11060612990
Dryer
Kenmore
11060622990
Dryer
Kenmore
11060702990
Dryer
Kenmore
11060712990
Dryer
Kenmore
11060722990
Dryer
Kenmore
11060724990
Dryer
Kenmore
11060727990
Dryer
Kenmore
11060802990
Dryer
Kenmore
11060812990
Dryer
Kenmore
11060814990
Dryer
Kenmore
11060817990
Dryer
Kenmore
11060832990
Dryer
Kenmore
11060842990
Dryer
Kenmore
1106085299
Dryer - Kenmore Dryer Model 110.6085299 (1106085299, 110 6085299) Parts
Kenmore
11060852990
Dryer
Kenmore
11060854990
Dryer
Kenmore
11060857990
Dryer
Kenmore
11061202010
Dryer
Kenmore
11061202011
Dryer
Kenmore
11061262311
Dryer - ELECTRIC DRYER
Kenmore
11061402310
Dryer - ELECTRIC DRYER
Kenmore
11061402311
Dryer - ELECTRIC DRYER
Kenmore
11061802000
Dryer
Kenmore
11061804000
Dryer
Kenmore
11061812000
Dryer