Part Location Diagram of 661570 Whirlpool Multi Rib Belt
See part 20 in the diagram
Replacing your Whirlpool Dryer Multi Rib Belt
( Grid squares measure 1x1 inch )

Multi Rib Belt 661570

Works With Model 11069822801!

Rated by 9 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$21.93
In Stock
Fix Number:
FIX382430
Manufacturer #:
661570
Manufactured by:
Whirlpool
Works With Model 11069822801!

Product Description

This is a single dryer drum belt that measures 93.5 inches. The belt rotates the dryer drum and is a common wear part that can become brittle over time. It can also stretch and change shape, so keep this in mind when comparing your old part to this new replacement part. When this part wears it can cause a thumping noise in your dryer, and that is a typical sign that it needs to be replaced. To access this part, you will need to remove the front panel of your dryer, and the belt will be found looped around the drummer, under the idler pulley wheel, and around the drive pulley. For a successful repair, you will need a pair of needle nose pliers, a Phillips screwdriver, a 1/4-inch nut driver, and a putty knife. Do not forget to disconnect the power to your appliance before you begin.

Videos For installing this part.

Replacing your Multi Rib Belt

Replacing your Multi Rib Belt

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.6 / 5.0, 9 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
David from Mount Carmel, PA
Parts Used:
W10837240, 661570, 279640
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
belt , pulley, and pulley bracket
Very easy... I you tubed nd watched the video took the dryer apart, found the problem & ordered the parts they arrived in 2 days and put it together in 45 minutes.
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
steve from pickens s.c., SC
Parts Used:
661570
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
dead dryer....broken belt
Unplug dryer.take front lower access panel off(only held by spring loaded pressure clip in upper left and right corners. Remove lint filter,remove darker blower shroud,unclip door springs,pull forward and lift top up about 1 foot,remove quarter inch screws holding front front panel on,two on top,two on front.drum is now just floating ,abo ut yo come out,pull drum out, take time to vacuum inside,dry paintbrush will help,while drum is out,loosely loop belt around drum,red side of belt facing up,reposition drum on back roller,it will sort of just hang there, route belt around motor shaft and spring loaded idler,lift drum from front so you can reposition front panel install screws back in front panel,install blower shroud and door spring's....you are home free now..P.S. Forgot to mention, unplugg door switch before removing front panel and don't forget to plug it back in during reassembly.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from CAMARILLO, CA
Parts Used:
661570, 279640
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Noisy belt idler
Remove rear panel,gas line and back drum brackets, removed belt idler removed belt from drum. Needed assistance with reinstalling belt due to drum needed to be lined up with front Door and rear drum bracket. Otherwise it was reality easy repair ??.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from DUXBURY, MA
Parts Used:
W10837240, WPW10446781, WPW10121334, 661570, WP3389420, 279640
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Idler pulley snapped off
Completely took dryer apart. Found problem. Ordered part. (Should have over nighted parts. ). Put dryer back together. The part company had a great video on disassemble. Watched it backwards to reassemble Works great. Hope this is helpful.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sergio from Brookfield, IL
Parts Used:
661570, 279640
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
My Dryer stop working at all.
I always get my parts from this site never fail. I just watch the video how to take apart the dryer and right away I noticed the belt drum ripped in pieces, once I got the drum out, the pulley was already out of the bracket, just order the pulley and the belt, follow the steps to put everything together. connect the dryer and Magic start working better than before. Thank You. Guys for the help.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Larry from Bonaire, GA
Parts Used:
661570, 279640
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
dryer was making loud noise
This unit is a front loader so the removal of parts is a bit different than what is shown on the video.Unplug the power. You need to remove the top panel, bottom front panel, top front control panel, and the front door. That part is the hardest to maneuver due to its awkward weight. Once all is removed (nutdriver takes out all the screws ) and wires disconnected, lift entire drum out. That gives you access to the idler pulley and ring. This also affords you the ability to clean out areas you could not access during normal cleaning. Then replace the belt reconnect it to the ideler pulley after putting drum back in place (this takes 2 people so one can hold drum steady to reconnect the belt) . Then put it all back together. As mentioned, watch the you tube video on this website first, and alter the process depending on if a front or top load dryer. Make sure the dryer is balanced once finished
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from Dakota, IL
Parts Used:
661570
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Broken Belt
Repair parts have been discontinued. The belt is still the same as the old one. Your video didn't work on my computer, but another youtube video did. Nothing to it.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sharon from Durango, CO
Parts Used:
661570, 279640
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Loud rhythmic clunking noise
Repaired by watching the great instruction video on this website and following the instructions. We probably didn't need the belt, but thought while everything was out, we might as well replace it. Ordered parts afternoon of 12/26 and arrived by fedex ground on 1/2.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Mansfiel, OH
Parts Used:
661570
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Dryer belt broke.
Disassembled the dryer got the old belt with part number on it and ordered a new belt from this site. The web site was very easy to use and the new belt arrived quickly. I put the new belt around the drum and the motor pulley with the spring tensioner and re-assembled the dryer.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX382430
Manufacturer Part Number: 661570
Brand
Model Number
Description
Kenmore
10697502820
Dryer - Kenmore Dryer Model 106.97502820 (10697502820, 106 97502820) Parts
Kenmore
11060052990
Dryer
Kenmore
11060052991
Dryer
Kenmore
11060056990
Dryer
Kenmore
11060056991
Dryer
Kenmore
1106007299
Dryer - Kenmore Dryer Model 110.6007299 (1106007299, 110 6007299) Parts
Kenmore
11060072990
Dryer
Kenmore
11060072991
Dryer
Kenmore
11060092990
Dryer
Kenmore
11060092991
Dryer
Kenmore
11060094990
Dryer
Kenmore
11060094991
Dryer
Kenmore
11060096990
Dryer
Kenmore
11060096991
Dryer
Kenmore
11060097990
Dryer
Kenmore
11060182000
Dryer
Kenmore
11060372710
Dryer - Dryer
Kenmore
1106090199
Dryer - Kenmore Dryer Model 110.6090199 (1106090199, 110 6090199) Parts
Kenmore
11060901990
Dryer
Kenmore
1106090299
Dryer - Kenmore Dryer Model 110.6090299 (1106090299, 110 6090299) Parts
Kenmore
11060902990
Dryer
Kenmore
11060904990
Dryer
Kenmore
1106090799
Dryer - Kenmore Dryer Model 110.6090799 (1106090799, 110 6090799) Parts
Kenmore
11060907990
Dryer
Kenmore
11060912990
Dryer
Kenmore
1106092299
Dryer - Kenmore Dryer Model 110.6092299 (1106092299, 110 6092299) Parts
Kenmore
11060922990
Dryer
Kenmore
11060924990
Dryer
Kenmore
1106092799
Dryer - Kenmore Dryer Model 110.6092799 (1106092799, 110 6092799) Parts
Kenmore
11060927990
Dryer