This is an authentic drum support roller kit for 29-inch-wide dryers. It includes 1 belt, 2 roller wheels and an idler pulley. The parts in this kit allow the dryer to tumble properly by supporting the drum cylinder. The idler pulley provides the tension needed for a multi-ribbed belt. The belt attaches to the drum, idler pulley, and motor pulley. If these parts are damaged, it could cause loud noises such as squeaking and squealing while the drum is turning. These are normal wear parts and are best replaced as a kit to ensure optimal performance.
Works with the following brands:
Whirlpool, Kenmore, Roper, Inglis
Works with the following products:
Dryer, Washer Dryer Combo
Fixes the following symptoms:
Noisy, Drum Not Spinning, Marks left on clothes, Heat stays on after drum has stopped
Part# 4392065 replaces these:
AP3131942, 587636, 4392065, 2014, 26000279435, 26000279436
...
Show more, 279435, 279436, 279708, 279708MS, 279709, 279709MS, 279860, 279948, 4392065VP, 691366K3, 80046, 8106, 8237, 8238 Show less
Works with the following brands:
Whirlpool, Kenmore, Roper, Inglis
Works with the following products
Dryer, Washer Dryer Combo
Fixes the following symptoms
Noisy, Drum Not Spinning, Marks left on clothes, Heat stays on after drum has stopped
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scottie
November 29, 2024
I just replaced the maintenance package. Put back together and pushed start. I can feel the heat but the drum is still not spinning. When I took apart I inspected old parts and one of the wheels was worn and flat in spots. What is the next step? What else could it be?
For model number WED4815EW1
Hi Scottie,
Thank you for your question. If one of the rollers worn or damaged, it will need to be replaced. The part number for the drum support roller kit is FIX347627. We hope this helps!
My dryer heats but doesn’t spin. I’ve ALREADY replaced all parts with the maitnace package. What would I check next?
For model number WED4815ew1
Hello Scottie, thank you for your question. If you have a noticeable lack of drum movement during the drying cycle, try physically rotating the drum by hand to reveal the extent of the issue. A properly functioning dryer drum should move relatively easily — if you find it hard to turn the drum manually, the Drum FIX11772901 may have seized.
Hello Edmond, thank you for contacting us. The issue is caused by a damaged belt, worn-out rollers, or a defective pulley. The most likely solution is to replace the maintenance kit, part number FIX373087. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Defective heater element dryer still runs.
Expect to spend a lot of time on your knees. Unplug appliance. Remove dryer hose. remove back cover 4-6 7mm bolts. Unplug dryer heater element connections 2 blade or pin connectors. Unbolt element cover and remove old element. Label wires. Hopefully the replacement connections match if not go to hardware store. Crimp or better solder on
... Read morenew connectors. Install element in housing and reattach. Clean out all old dirt and lint. check old belt for wear and re-grease drum roller shafts. re-install back cover, hose and plug in. enjoy you just saved $600
I bought the maintenance kit which included the belt, roller wheels & tensioning arm assembly. The instruction video was great, but I had a real problem trying to get the belt through the tensioning arm and on to the motor pulley. As someone else has pointed out, It seem that you need three hands, and there's not enough room for two peo
... Read moreple. After a bit of pondering, I got some scrap bits of wood and wedged "open" the tensioning arm such that the wheel was a bit beyond it's position in the final assembly. This was easily accomplished with only two hands. The belt was then easily threaded through the arm and put around the motor pulley. The wood bits were then removed. TA-DA!
Following the instructions supplied, threading the new belt was easy. Support rollers installed really easily and the new idler pulley just snaps in. It was a good time to vacuum the interior, since the door panel was off, and to vacuum out the vent pipe. The instructions call for a small putty knife as a "shoe horn", to seat the rear dru
... Read morem seal, which really worked nicely. The trickiest part is holding the drum, while coaxing the door panel into place, so that the lower spring clips catch and the mounting screws can be started.
Watched the installation video from this site performed the repairs and the Dryer works like new. Longest part of the repair was vacuuming the cabinet out and cleaning the shafts for the replacement parts. The total repair time, with cleaning was approximately a hour. Definitely recommend this site for any Do-It Yourself consumers!
I followed the video instructions and had no problem changing the parts and even the belt while I was at it. The most challenging part was getting the inside electrical cables unplugged from one another before taking the front panel off the dryer.
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Bad motor and drum belt.
Open the top of the washer with a flat screwdriver it pries open. Removed the top two 5/16 screws from the inside of the front panel and removed the front panel, It has no screws at the bottom. Then remove four 1/2 nuts from the drum panel and remove the drum panel. Take the drum belt off of the drum and remove the drum. Remove the motor
... Read moreby unplugging the one big wire plug and two single blue wires. Be sure to take note of the location that each of the blue wires came from. The blower fan on the outside end of the motor unscrews clockwise and the motor is held in place with two clips. One on each side of the motor. The two drum rollers are each held on with a bolt in the center of them. After the motor is in place the new blower fan is threaded on counter clockwise on the motor shaft. Put the blower fan cover panel back on and reassemble the dryer. make sure the drum belt is in alignment with the motor pulley Also make sure the drum felt around the drum is not folded or torn and reinstall the drum panel. Spin the drum to check for metal on metal and or drag from roller alignment. Reinstall the front panel and close the top of the dryer.
Unplug dryer, take two screws out of lint catcher, pop top with putty knife and lay back, take two screws out of front panel, slide off, lay machine on its back, apply pressure to tensioner to take off belt, remove drum, it's really light, swap out drum rollers and tensioner, put drum back in, make sure felt seal is in place, put belt bac
... Read morek on, and reassemble.
some of the new parts could not be used (too difficult to install)
I used the videos on you tube. The installation would have gone much smoother but some of the new parts could not be used due to the extreme difficulty in installing them. These part included the white triangle keepers for the rollers, the slip washer that keeps the left roller bracket in place, and the tension roller. I had to use the o
... Read moreld parts that I had removed. This model does not use the roller type tension system. It uses the Teflon strip instead of the roller which apparently incapable.I made attempts to contact your customer service to check on a solution but to no avail. The dryer is working fine but I would feel better if I could have installed all the new parts in the kit.
I followed the easy video instructions. It took the mystery out of it. Replaced belt, 2 rollers, tension device. Some folks claimed to have difficulty getting the belt onto the motor pulley once it was thru the tensioner. The trick was to take a big screw driver and slide it into the belt loop as it goes through the tensioner. Then si
... Read moremply use the screw driver as a pry bar. Pull a little to the right and it sleeps right on. I saved a bunch of money. Will purchase all of my appliance parts from here now. Service was fast!
Read less
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
★
Customer Reviews
Average Rating:
(10 Reviews)
4.9
★★★★★
★★★★★
Filter By Rating:
5★
9
4★
1
3★
0
2★
0
1★
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bob M - October 27, 2021
Verified Purchase
Dryer squeak gone
The parts fit perfectly and were better made than the original.
★★★★★
★★★★★
Brian D - October 24, 2021
Verified Purchase
Perfect
Exactly what i needed and arrived quickly
★★★★★
★★★★★
Curtis M - October 8, 2021
Verified Purchase
Dryer parts.
Parts sold at a fair price, they were quickly delivered and worked well.
★★★★★
★★★★★
GERALD T - September 9, 2021
Verified Purchase
Dryer Maintenance/Noisy
Replaced worn parts without a problem. Working like a new dryer.
★★★★★
★★★★★
Jeremy T - April 26, 2021
Verified Purchase
Fixed the noise, only one small complaint
My dryer was a Roper RGX3514PQ0 and was making a horrendous noise that sounded like there was a pair of fighting cats while it was running. The maintenance kit did fix the noise and was easy to do. The video on the parts page answered all of my questions. So the good is that for ~50 bucks my dryer sounds as good as new.
My only complaint is that only two of the tri-rings came in the kit, and it clearly shows I should have had 4. Fortunately I was able to make do, but if those tri rings were the problem I would of been screwed.
That being said, the fix was easy and cheap enough to where I would still recommend buying the maintenance kit, but maybe spend the extra 12 bucks to get some extra tri rings and do a thorough job. The tri rings are also easy to bend out of shape while putting on for inexperience do it your selfers, so probably a better idea to have extra anyway.
★★★★★
★★★★★
William J - January 16, 2021
Verified Purchase
Dryer repair
Does the job.
★★★★★
★★★★★
Richard P - July 8, 2020
Verified Purchase
Fixed
My belt broke so I decided to get this kit and rebuild everything. Glad I did. Dryer runs a lot quieter and smoother now. Shipping was very fast which was greatly appreciated.
★★★★★
★★★★★
Robert O - April 5, 2020
Verified Purchase
Whirlpool dryer repair.
The maintenance kit included new rollers, idler pulley and drum belt. All parts were of high quality and fit perfectly.
I will definitely use Fix.com for future repair parts.
★★★★★
★★★★★
Jessica B - February 19, 2020
Verified Purchase
Yep, they work!
The parts came as ordered, neatly contained in a sealed plastic bag. Quality seemed on par with the parts I was replacing. Shipping was timely (ordered Monday morning, delivered Thursday afternoon). The paper instructions that came with the kit were “eh”, but the video on the website was worth its weight in gold.
★★★★★
★★★★★
Fred L - October 25, 2019
Verified Purchase
Great Kit, Solved my problem!
One of the wheels was wearing away and causing the drum to make a lot of noise when running. I changed all the parts in the kit as a preventative maintenance measure. It was easy once I watched the video. Thanks!
Model Compatibility
This part works with the following models:
Fix Number: FIX373087
Manufacturer Part Number: 4392065
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
