High Limit Thermostat and Thermal Cut-Off Kit 279973
Works With Model MDE22PDBZW0!
Rated by 6 customers
?
Really Easy
30 - 60 mins
Ratings submitted by customers like you who bought this part.
?
$53.23
In Stock
Fix Number:
FIX334387
Manufacturer #:
279973
Manufactured by:
Whirlpool
Works With Model MDE22PDBZW0!
Product Description
This thermal cut-off kit includes a genuine OEM replacement high limit thermostat and a fuse. The thermostat is a safety device used to prevent the dryer from overheating, and the fuse serves as a backup. If the temperature in your dryer gets above the thermostat, the fuse will blow. Once the fuse has tripped, it will need to be replaced. If your dryer will not start, gets too hot, shuts off too soon, or there is no heat, you may need to replace these components. Please be sure to disconnect the power supply to your dryer before beginning this repair, as you will be working with electrical components.
This thermal cut-off kit includes a genuine OEM replacement high limit thermostat and a fuse. The thermostat is a safety device used to prevent the dryer from overheating, and the fuse serves as a backup. If the temperature in your dryer gets above the thermostat, the fuse will blow. Once the fuse has tripped, it will need to be replaced. If your dryer will not start, gets too hot, shuts off too soon, or there is no heat, you may need to replace these components. Please be sure to disconnect the power supply to your dryer before beginning this repair, as you will be working with electrical components.
Works with the following brands:
Whirlpool, Maytag, Kenmore, KitchenAid
Works with the following products:
Dryer, Washer Dryer Combo
Fixes the following symptoms:
Too hot, Not Heating
Part# 279973 replaces these:
AP3094323, 897710, 279973, 279973VP, 3391913, 3404151
...
Show more, 3404152, 3977395, 8318314 Show less
Videos For installing this part.
Replacing your High Limit Thermostat and Thermal Cut-Off Kit
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerome
July 9, 2022
Do the wires plug in to thermostat like the first one
For model number Medb850wqo
Hello Jerome, thank you for your question. We have a video on how it attaches for you to view on the installation of the Thermal cut off Kit FIX334387. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
The dryer thermal fuse, also sometimes referred to as the thermal cut off or temperature fuse, is a 2 by 1/2-inch, white, plastic safety mechanism that halts the flow of electricity to the motor circuit when a dryer over...
When connected to electricity the dryer heating element glows red hot and generates heat. When air is blown over it, it heats the air which is used to dry the clothes. The heating element fits inside the heater housing i...
The internal-bias thermostat, also know as a thermistor, is used to prevent the dryer from overheating. It does this by monitoring and controlling the temperature of the inside of the dryer drum. If your dryer is overhe...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
no owners manual fount, local service was weeks out & 100.00 to look at it.Pulled dry out,removed back cover & top, found technical repair manual inside ! found & retrieve codes.Looking for parts stumbled onto your great web site, ordered all possible parts you listed. spent 175.00 fixed,re assemble within 1 hr. HAPPY-HAPPY. HAPPY-WIFEY
... Read more-HAPPY-LIFEY !!
Watched YouTube videos on how to diagnose and execute the repair. Always unplug the unit prior to performING any work. Diagnosed the heating element was bad. Easy to remove using only a 1/4" socket or nut driver. Decided to replace the thermal fuse and thermostat while I had the unit apart. To reassemble just reverse the steps. Very
... Read more easy repair to complete yourself with little/no appliance knowledge. Good luck.
First I checked the resistance of the heating element to ensure that it was not worn out. It was 10 ohms which told me that it was OK. The most likely problem therefore was the thermostat and/or thermal fuse. Partselect had the pair for a good price, so it was worth it to buy it even without being 100% sure those were the problematic
... Read morecomponents. The old parts were removed pretty easily with a socket wrench, although it was a bit difficult to reach the screws. After replacing the parts, the dryer worked perfectly and my wife was overjoyed. Probably saved $100 by not having to call a repairman.
Dryer getting extremely hot and blowing thermal fuse
Bought fuse and installed it. Bought another fuse along with high limit thermostat and thermistor. Finally figured out it was my control board and ended up buying a new dryer.Got tired of trying parts so bought a new dryer.Thank you very much.
My dryer was taking 2-3 cycles to finish drying each load. I replaced the heating element as that was the #1 recommended part to replace for this problem but it did not fix my problem. So I decided to replace the #2 recommended part (Thermostat & Thermal Fuse Kit) and this fixed my problem! Here are steps to replace the 2 parts/sensors. T
... Read morehey are attached to the same housing that the heating element is attached to so installation instructions are almost identical. There are 2 different ways to do this install. (1) replacing only the 2 sensors/parts themselves while leaving the housing attached to the dryer or (2) removing the housing for the heating element and then replacing the 2 parts/sensors on a table. I chose method #2 and I would definitely recommend this method. To do this repair, you need the following tools: flash light, putty knife (or a butter knife if you don't have one), 1/4" socket, needle nose pliers (optional). STEP 1: UNPLUG YOUR DRYER!! THIS IS VERY IMPORTANT! STEP 2: Use a flash light to locate the clips holding the lower panel in place (they are approx 4" in from either side). One at a time, use a putty knife (or butter knife) to press down on the clip while pulling on the panel to release each side. The panel folds out and down. STEP 3: You will see the heat shield on the right, held in by one hex head screw. Use a 1/4" socket to remove the screw and heat shield. STEP 4: Use needle nose pliers (or your fingers) to disconnect the 6 wires connected to the left side of the housing. Make sure you remember which wires go on top and which ones go on bottom (take a pic or record short video if you have to). The wires on my dryer were easy to remember as the red wires with a white stripe went on top. STEP 5: The heating element is positioned in an open-front housing. This housing is held in place by 2 hex head screws. Use a 1/4" socket to remove the screws. Then, wiggle the housing and turn it 1/4 turn clockwise and pull it straight out from under the dryer. Place it on a table or work bench. STEP 6: Both parts/sensors are attached to the left side of the housing with 1 or 2 hex head screws. Use a 1/4" socket to remove the screw(s) holding either part in place (replace 1 part/sensor at a time). NOTE: TAKE A PICTURE OF HOW THE PART/SENSOR IS INSTALLED BEFORE YOU REMOVE IT TO MAKE SURE YOU INSTALL IT IN THE PROPER DIRECTION! Installation instructions are reverse of removal instructions.
I take front panel of to get access to the heat element check for continuity on termostat fuse and element heater my element heater was done so l decided to replace all 3 pieces just to make sure they all brand new so I don't have to worried in the near future .Really easy task and is running like brand new. the parts were not expensive
... Read more so was all good .special thanks to the guys at this site.
Read less
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX334387
Manufacturer Part Number: 279973
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.