Part Location Diagram of 279838 Whirlpool Heating Element - 240V 5400W
See part 17 in the diagram
Replacing your Whirlpool Dryer Heating Element - 240V 5400W
( Grid squares measure 1x1 inch )

Heating Element - 240V 5400W 279838

Works With Model TEDS780JQ0!
★★★★★
★★★★★
9 Reviews

Rated by 96 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$64.84
In Stock
Fix Number:
FIX334313
Manufacturer #:
279838
Manufactured by:
Whirlpool
Works With Model TEDS780JQ0!

Product Description

Sourced directly from the manufacturer, this heating element is an OEM approved replacement part for a variety of dryers and is sold individually. It measures approximately 10.5 inches long, 7.5 inches wide and 2 inches deep. The heating element is the primary source of heat used to dry the clothes in your dryer. This heating element is strung with a coiled wire made of a nickel and chrome alloy. It may need to be replaced if your dryer does not produce heat, if it produces too much heat, or if it will not turn on. If your dryer does not heat, first check for a blown thermal fuse on the blower housing before replacing the heating element. In most cases, the heating element will have a break in the element, making it defective. For this repair you will need a quarter inch nut driver and a pair of needle nose pliers. Start this repair by disconnecting the power and then remove the dryer vent. This repair is done from the back of the appliance with the back panel removed. With the panel removed, this will give you access to the heater element. Your next step is to remove the high-limit thermostat from the housing and remove the two wires from the heater terminals. Now remove the screws securing the element to the housing and slide the element out. Installation of the new part is done in the reverse order.

Videos For installing this part.

Replacing your Heating Element - 240V 5400W

Replacing your Heating Element - 240V 5400W

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

View More View Less
Dryer Thermal Fuse
$19.61
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.1 / 5.0, 96 reviews.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
gary from apex, NC
Parts Used:
WP3392519, WP3387134, 279838
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
dryer not heating
Checked the heating element and found a break in the heating coil. Decided to change the thermal fuse and the the cycling thermostat because of the age of the dryer.
139 of 154 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tim from Fargo, ND
Parts Used:
WP3977767, WP3387134, 279838, 279816
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Not getting hot enough, eventually no heat
I ordered the parts I thought may be the problem. If you watch any of the videos to help with a repair most of the video time is spent taking off and putting on the back panel. That being said once the panel was off it took me maybe 20 minutes to install the 4 parts I had ordered. Could have gone faster but also had 3 kids ages 2 and u p to work around. This web site not only helps you trouble shoot but then gives discounts for the parts needed and helps with the repair through videos. Obviously the objective was to help customers from start to finish and I believe they achieved just that. Will use this site in the future and tell others about it as well. My instructions are to watch their video to do the repair. Don't rush or get anxious just focus on your task. My wife said the dryer works like new now.
50 of 55 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from Mobile, AL
Parts Used:
285753A, WP8318084, 388253A, WP358237, WP3392519, 285785, 3360629, 279838
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
would not spin
well i replaced a lot of parts..but i think it was the the lid switch. but now its brand new..Thanks
16 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patrick from Charlotte, NC
Parts Used:
WP3392519, 279838
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Dryer not heating
Remove back cover. Switch out parts (both plug in and affixed by screws) and test. Put back cover on.
10 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cynthia from Lincoln, CA
Parts Used:
WP3977767, WP3392519, WP3387134, 279838, 279816
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
My Stopped having heat
I first watched videos on the problem, then I ordered the parts & proceeded with installing them.
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paula from RICHMOND, VA
Parts Used:
279838
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Dryer not heating properly.
After trying the fuse I ordered the heating element. Your installation instructions were fantastic. Once installed and I pluged it in hot air was drying the clothes. Easy to order and easy to install. Saved me lots of money.
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Ogdensburg, NJ
Parts Used:
279838
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
Drum turning, but no heat
Unplug dryer, Remove back panel, and remove thermostat from heating element. Remove heating element (2 screws) and put new element in. Reattach thermostat, put on back panel, plug in dryer and presto! No more running to laundromat. Super easy repair!
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
lawrence from blackduck, MN
Parts Used:
279838
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
element burnt out
replace the heating eliment
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patrick from Upper Marlboro, MD
Parts Used:
279838
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Dryer runs, but no heat
remove rear panel of dryer, locate dryer heating element at lower right side of dryer, disconnect thermostat wiring from heat coil, "use flat head screw driver as wedge if connectors seam tight" remove thermostat, then remove 2 screws from heat coil, then lift out coil. replace with new heat coil.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ronald from winter haven, FL
Parts Used:
279838
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Whirl pool dryer didnt heat
Went on YouTube and it took me here. I saw what most people's problem was, ordered the part. And followed the instructions, it works now!! Thanx
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Customer Reviews
Average Rating: (9 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    9
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX334313
Manufacturer Part Number: 279838
Brand
Model Number
Description
Kenmore
1106012510
Dryer - ELECTRIC DRYER
Kenmore
1106012990
Dryer - Kenmore Dryer Model 110.6012990 (1106012990, 110 6012990) Parts
Kenmore
11060222511
Dryer - ELECTRIC DRYER
Kenmore
11060602990
Dryer
Kenmore
11060612990
Dryer
Kenmore
1106062110
Dryer
Kenmore
11060702990
Dryer
Kenmore
11060722990
Dryer
Kenmore
11060727990
Dryer
Kenmore
11060817990
Dryer
Kenmore
11060832990
Dryer
Kenmore
1106085299
Dryer - Kenmore Dryer Model 110.6085299 (1106085299, 110 6085299) Parts
Kenmore
11060852990
Dryer
Kenmore
11060854990
Dryer
Kenmore
11060857990
Dryer
Kenmore
11060882990
Dryer
Kenmore
11060884990
Dryer
Kenmore
11060887990
Dryer
Kenmore
11061202011
Dryer
Kenmore
11061252010
Dryer
Kenmore
11061262311
Dryer - ELECTRIC DRYER
Kenmore
11061802000
Dryer
Kenmore
11061804000
Dryer
Kenmore
11061812000
Dryer
Kenmore
11061814000
Dryer
Kenmore
1106192311
Dryer - ELECTRIC DRYER
Kenmore
11062102310
Dryer - 29" ELECTRIC DRYER
Kenmore
11062202101
Dryer
Kenmore
11062212100
Dryer
Kenmore
11062212101
Dryer