Part Location Diagram of 279816 Whirlpool Thermal Cut-Off Kit
See part 9 in the diagram
Replacing your Whirlpool Dryer Thermal Cut-Off Kit
( Grid squares measure 1x1 inch )

Thermal Cut-Off Kit 279816

Works With Model CEDX463SQ0!
★★★★★
★★★★★
8 Reviews

Rated by 47 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$36.55
In Stock
Fix Number:
FIX334299
Manufacturer #:
279816
Manufactured by:
Whirlpool
Works With Model CEDX463SQ0!

Product Description

This thermal cut-off kit is for a dryer and is sourced directly from the manufacturer. The thermal cut-off is a safety mechanism that is designed to trip if your dryer is at risk of overheating, to prevent further damage. It may need to be replaced if your washer is no longer heating properly. This is a one-time fuse, meaning if it trips, it needs to be replaced immediately. A common reason for this part to fail is if the heater housing is not receiving proper airflow, normally caused by an obstruction in the exhaust vent, a clogged lint screen, or a broken blower wheel. This kit includes 1 high-limit thermostat with a limit of 250 degrees Fahrenheit, 1 thermal cut-off fuse with a limit of 309 degrees Fahrenheit, jumper wires and new female spade terminals. These components are attached to the heater housing.

Videos For installing this part.

Replacing your Thermal Cut-Off Kit

Replacing your Thermal Cut-Off Kit

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

View More View Less
Dryer Thermal Fuse
$19.61
In Stock
Heating Element - 240V 5400W
$64.84
In Stock
Dryer Cycling Thermostat
$27.94
In Stock
Dryer High Limit Thermostat
$23.49
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.9 / 5.0, 47 reviews.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Tim from Fargo, ND
Parts Used:
WP3977767, WP3387134, 279838, 279816
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Not getting hot enough, eventually no heat
I ordered the parts I thought may be the problem. If you watch any of the videos to help with a repair most of the video time is spent taking off and putting on the back panel. That being said once the panel was off it took me maybe 20 minutes to install the 4 parts I had ordered. Could have gone faster but also had 3 kids ages 2 and u p to work around. This web site not only helps you trouble shoot but then gives discounts for the parts needed and helps with the repair through videos. Obviously the objective was to help customers from start to finish and I believe they achieved just that. Will use this site in the future and tell others about it as well. My instructions are to watch their video to do the repair. Don't rush or get anxious just focus on your task. My wife said the dryer works like new now.
50 of 55 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cynthia from Lincoln, CA
Parts Used:
WP3977767, WP3392519, WP3387134, 279838, 279816
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
My Stopped having heat
I first watched videos on the problem, then I ordered the parts & proceeded with installing them.
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
wendy from Palmersville, TN
Parts Used:
WP3390291, 279816
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
hi low limit switch
follow the video they give you its simple
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patrick from Fort Myers, FL
Parts Used:
279816
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Dryer ran, no heat
Watched a couple of YouTube videos to troubleshoot problem. Found on the web and ordered parts. They came in 4 days, installed parts and happy wife! I did cut the wrong end off of the jumper wire for the modification but was able to make it work. Didn't know how hard it was to find a 5/16" female spade connector. LOL
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Roger from Medford, WI
Parts Used:
WP3387134, 279816
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
The dryer gradually lost heat over e period of a few months until it was not heating at all.
Having no clue or diagnostic tools I used the symptoms to diagnose the problem. Since the parts were relatively inexpensive I ordered those parts I thought would be most likely at fault. I opened up the back of the dryer and discovered a wire had worked itself loose from a sensor. I plugged the wire back in and now the dryer works fine. I 'm keeping the parts for the time I will need them.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Larry from Springhill, FL
Parts Used:
WP3977767, WP3398095, WP3392519, 279816
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
Dryer would not start
Removed the screws from both back panels to gain access to the Push-To-Start-Switch and complete rear unit. Removed vent hose and panel for easier install of components due to dryer in garage. Matched up each replacement component to the old parts. Removed old part with wires still attached to ensure wires were replaced correctly. All par ts are attached with screws making it easy to remove and replace. Dryer works perfectly. A very easy project.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from PEMBROKE, GA
Parts Used:
WP3392519, 279838, 279816
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Sporadic heat
Removed from electric source, removed back panel and replaced all parts as instructed.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jessica from Marietta, GA
Parts Used:
279816
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
Dryer not heating up
I watched your youtube.com video on how to trouble shoot and determined the the problem using my multimeters and then ordered the parts for the fix. I followed the instructions and it was easy to do. The dryer is working great now.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ervin from Summersville, WV
Parts Used:
279816
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
no heat and not drying clothes.
Replaced thermal cut on and thermal cut off, with a new thermal cut-off kit, also ordered a new thermal fuse and replaced it. Dryer is now heating. Thanks for your help in finding out the problem with my dryer and video instructions on how to fix the problem. Also would recommend your web site to any of my family or friends that would have problems with there dryer. Your prices are reasonable and received in 3 days of ordering.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carlos from Cheverly, MD
Parts Used:
279816
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Bowing cool air and not heating at all
I ohm out the cut off thermal fuse, it was defective. so i order the whole Thermal cut-off kit. when i received the kit I simply used a nutdriver to remove the 2 components, installed the new part. solved my problem. thanks From Carlos
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Customer Reviews
Average Rating: (8 Reviews)
4.1
★★★★★
★★★★★
Filter By Rating:
  • 5
    5
  • 4
    1
  • 3
    1
  • 2
    0
  • 1
    1
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX334299
Manufacturer Part Number: 279816
Brand
Model Number
Description
Kenmore
11060012000
Dryer
Kenmore
11060012001
Dryer
Kenmore
11060012002
Dryer
Kenmore
11060022010
Dryer
Kenmore
1106012510
Dryer - ELECTRIC DRYER
Kenmore
1106012990
Dryer - Kenmore Dryer Model 110.6012990 (1106012990, 110 6012990) Parts
Kenmore
11060172000
Dryer
Kenmore
11060172001
Dryer
Kenmore
11060172002
Dryer
Kenmore
11060202990
Dryer
Kenmore
11060212990
Dryer
Kenmore
11060222511
Dryer - ELECTRIC DRYER
Kenmore
11060232000
Dryer
Kenmore
11060232001
Dryer
Kenmore
11060232002
Dryer
Kenmore
11060522900
Dryer
Kenmore
11060602990
Dryer
Kenmore
11060612990
Dryer
Kenmore
1106062110
Dryer
Kenmore
11060622990
Dryer
Kenmore
11060702990
Dryer
Kenmore
11060712990
Dryer
Kenmore
1106072011
Dryer - ELECTRIC DRYER
Kenmore
11060722990
Dryer
Kenmore
11060724990
Dryer
Kenmore
11060727990
Dryer
Kenmore
11060802990
Dryer
Kenmore
11060812990
Dryer
Kenmore
11060814990
Dryer
Kenmore
11060817990
Dryer