Part Location Diagram of WP8577274 Whirlpool Thermostat, Internal-Bias
See part 42 in the diagram
Replacing your Whirlpool Dryer Thermostat, Internal-Bias
( Grid squares measure 1x1 inch )

Thermostat, Internal-Bias WP8577274

Works With Model GEW9250PW0!
★★★★★
★★★★★
2 Reviews

Rated by 22 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$27.89
In Stock
Fix Number:
FIX11746740
Manufacturer #:
WP8577274
Manufactured by:
Whirlpool
Works With Model GEW9250PW0!

Product Description

The internal-bias thermostat, also know as a thermistor, is used to prevent the dryer from overheating. It does this by monitoring and controlling the temperature of the inside of the dryer drum. If your dryer is overheating, not drying your clothes properly, or is not providing enough heat, there could be an issue with the thermostat. You can test the part by using a multimeter, which should read 10,000 ohms of resistance at room temperature, give or take a 10 percent fluctuation. If your reading is not in that range, the thermistor will need to be replaced. Replacing this part is a simple repair, but to access it you will need to lift the main top on your dryer, and remove both the front panel and the bulkhead. The part is found next to the thermal fuse, on the blower housing. Be sure to disconnect the power supply to your dryer before beginning this repair. This is a genuine OEM thermistor, made of white plastic and is sold individually.

Videos For installing this part.

Replacing your Thermostat, Internal-Bias

Replacing your Thermostat, Internal-Bias

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

6 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barry
February 2, 2023
To replace the Thermostat Internal Bias Switch. Is it located going thru the front of the unit or thru the back?
For model number MED 6000 XW
Fix.com logo
Hello Barry, Thank you for writing. We suggest watching the How to Video for more details on accessing the part and replacing it. We hope this helps!

Was this helpful?
Thank you for voting!
Barry
February 2, 2023
I need to replace the Thermo Stat on my Maytag Dryer and looking over the internet I saw video for disassembly of the front of the dryer and a different one showing installation on the back of the unit. Can you tell which is the right one? Thanks
For model number MED6000XE
Fix.com logo
Hello Barry, thank you for your inquiry. The video for this part we have on site shows to be disassembled from the Top and Front. We hope this information helps!

Was this helpful?
Thank you for voting!
Faith
February 20, 2023
The dryer does not work when set on normal setting. It shuts off before the run time is complete and the clothes are not dry. It does not have this problem when using any other settings. What part do I need to fix this?
For model number Medb835dw3
Fix.com logo
Hello Faith, thank you for reaching out. According to our research, the issue seems to be with the Moisture Sensor and you may need to replace it, the part number is FIX12348005. It monitors the clothing's moisture level and sends a signal to the control board when the clothes are dry. If that does not help, we would suggest checking the Thermostat, part number FIX11746740. We hope this sorts out your problem!

Was this helpful?
Thank you for voting!
Related Parts:
Ginger
April 6, 2023
My dryer would turn on and once I would hit start, it would immediately turn off. Now it won’t turn on at all. I’ve replaced the internal-bias thermostat and it still will not turn on. I’ve also turned of the breaker to make sure that wasn’t off.
For model number WED8500DW4
Fix.com logo
Hello Ginger, thank you for contacting us. A blown thermal fuse does not allow the dryer to start its operation. Use a multimeter to check if the thermal fuse has continuity. If the thermal fuse, part number FIX11766766, does not have continuity replace it. We hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
Rich
March 5, 2024
This dryer is all the sudden way over heating the clothes. Very hot too touch and also has all the clothes come out excessively wrinkled. I am replacing the thermostat. Is there any other possible cause?
For model number WED9500TW2
Fix.com logo
Hi Rich, thank you for the question. Based on the description that you have provided, the issue is with the high-limit thermostat, part number FIX11746386. It shuts off the heating element or burner when the dryer overheats. We would recommend replacing the high-limit thermostat to fix the issue. We hope this helps, good luck with this repair!

Was this helpful?
Thank you for voting!
Related Parts:
Dustin
May 5, 2024
My dryer has power and when I hit the start button to start a load in the dryer, it beeps and then nothing happens
For model number WED8900BC0
Fix.com logo
Hello Dustin, thank you for your inquiry. Based on our understanding of the issue, we would suggest checking the door switch, part number FIX11753512, to solve the problem. It prevents the dryer from running when the door is open. Glad to be of help!

Was this helpful?
Thank you for voting!
Related Parts:
View More View Less
Dryer Thermal Fuse
$19.61
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.3 / 5.0, 22 reviews.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
jeffrey from Brookhaven, PA
Parts Used:
WP8577274, WP3390719, WP3387747, 279769, 279570
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
Dryer would run, but not heat
Needed it running quick, so no diagnostics. Ordered one of everything that could fix problem (plus a new door catch). Tipped it onto it's back & popped the bottom cover off. Element, thermal cutoff, thermistor, and fuse. were right in front and held by 2 screws each (don't drop them, don't ask). A little bit tight inside, but no big issu e. vacuumed the inside, replaced everything (it was the Heating Element, by the way), slapped the cover on, and put it back in its spot. works like it was new. Yes, I unplugged it first. Remember! Safety Third!
22 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
dave from COLCHESTER, VT
Parts Used:
WP8577274, WP8544771, WP3392519, WP3391914, 279973, 279457
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
no heat
no owners manual fount, local service was weeks out & 100.00 to look at it.Pulled dry out,removed back cover & top, found technical repair manual inside ! found & retrieve codes.Looking for parts stumbled onto your great web site, ordered all possible parts you listed. spent 175.00 fixed,re assemble within 1 hr. HAPPY-HAPPY. HAPPY-WIFEY -HAPPY-LIFEY !!
13 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
MARK from Tucson, AZ
Parts Used:
WP8577274, WP3406653, WP3392519, WP3387223, 279570
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Dryer shut off early
Removed front bottom and replaced parts
8 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Daniel from Winter Haven, FL
Parts Used:
WP8577274
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
the dryer got to hot.
dryer got to hot and shut off with an Error message "E1". Found this site after many. Better explanations and half the price for the part verses Sears. I had watched Sears Tech. Tear down the machine before so i had a pretty good idea how to do it. Takes two people, just for that extra hand to hold things. The Electrical connection clips were kind of tricky to undo. So far so good. Good luck.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Al from Cape Coral, FL
Parts Used:
WP8577274, 72017, WP3390719, WP3387747
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
No heat when trying to dry clothes .
Followed instructions on your videos. Everything went as planned and the dryer works like new....
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Christopher from New Castle, DE
Parts Used:
WP8577274, WP3392519, 279769
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
dryer blow fuse, was running hot
replaced the above items, dryer worked but did not solve the problem of running hot on all settings, replaced the temp gauge, did not solve the problem. Realized it was probably the electronic control assy. Decided to replace the dryer given this one's age and the ability to get a new one for about $400. Parts sent were correct. I sho uld have checked the continuity of the parts prior to buying the new ones. Probably only needed a fuse.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from ormond beach, FL
Parts Used:
WP8577274
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
inconsistant drying.
There are two sensors located on the top of the blower housing. The one with an ohm reading or no reading is the thermistor. Simply replace it.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Srinivasan from FREMONT, CA
Parts Used:
WP8577274, WP3392519
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
Dryer not heating sufficiently.
Unplugged the dryer from the wall outlet.
NO NEED to remove the top panel or drum for this!
Open the lower front panel of the dryer by holding down the metal clips with a flat screw driver.
Clean the path of lint removal system including the lint chamber.
Suck out all lint with a vacuum from the internals of the dryer and the rear lint outlet.
Remove two nuts holding the fan cover.
Use a paint brush on the fan blades to remove caked lint and suck out all of the lint with a vacuum.
With the lint removed, use a pair of nose pliers to disconnect wiring to the fuse.
Remove the old fuse with a nut driver and replace with new one, wiring it back.
Do the same with the Thermostat which is located right next to the Thermal fuse in this model.
Put back fan cover and lower cabinet cover of the dryer.
Plug unit back into the outlet.
Run diagnostics. if all parts show working.
Do a test run and make sure dryer hits right temperatures in different modes.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Randall from Carlsbad, CA
Parts Used:
WP8577274, WP338906, WP3387223, 279311
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Would not dry clothes completely in any setting.
As this site recommends the parts that would be needed to fix the problem, it recommends the most likely to the least likely. Of course I bought the least likely and proceeded to buy all parts up the the most likely. All though I only spent about $100.00 total, it was the most likely that fixed the problem. The fixes were fairly easy to do and were all made from the front side of the unit. Not much space to work in but made all the fixes with out issues. Unit seems to be running well. Glad I did it myself, would do it again!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Litchfield Park, AZ
Parts Used:
WP8577274
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Error code E -1, Dryer would stop after 2 minutes.
Unplug. Removed the lower front panel. Locate identical part inside of Dryer. Used correct socket to break free the two screws. Removed the old Thermistor. Removed wires from old part replaced wires. Replace with new Thermistor, install two screws. Re install front panel. Plug in Dryer. Saved several hundred dollars as Dryer works great o nce again! Thanks, it took me longer to research the cause than to replace the part!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Customer Reviews
Average Rating: (2 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    2
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX11746740
Manufacturer Part Number: WP8577274
Brand
Model Number
Description
Kenmore
11060052990
Dryer
Kenmore
11060052991
Dryer
Kenmore
11060056990
Dryer
Kenmore
11060056991
Dryer
Kenmore
1106007299
Dryer - Kenmore Dryer Model 110.6007299 (1106007299, 110 6007299) Parts
Kenmore
11060072990
Dryer
Kenmore
11060072991
Dryer
Kenmore
11060092990
Dryer
Kenmore
11060092991
Dryer
Kenmore
11060094990
Dryer
Kenmore
11060094991
Dryer
Kenmore
11060096990
Dryer
Kenmore
11060096991
Dryer
Kenmore
11060097990
Dryer
Kenmore
11060372710
Dryer - Dryer
Kenmore
11060882990
Dryer
Kenmore
11060884990
Dryer
Kenmore
11060887990
Dryer
Kenmore
1106093299
Dryer - Kenmore Dryer Model 110.6093299 (1106093299, 110 6093299) Parts
Kenmore
11060932990
Dryer
Kenmore
1106093699
Dryer - Kenmore Dryer Model 110.6093699 (1106093699, 110 6093699) Parts
Kenmore
11060936990
Dryer
Kenmore
1106094299
Dryer - Kenmore Dryer Model 110.6094299 (1106094299, 110 6094299) Parts
Kenmore
11060942990
Dryer - Kenmore Dryer
Kenmore
1106095299
Dryer - Kenmore Dryer Model 110.6095299 (1106095299, 110 6095299) Parts
Kenmore
11060952990
Dryer - Dryer
Kenmore
11060954990
Dryer
Kenmore
1106095699
Dryer - Kenmore Dryer Model 110.6095699 (1106095699, 110 6095699) Parts
Kenmore
11060956990
Dryer
Kenmore
1106095799
Dryer - Kenmore Dryer Model 110.6095799 (1106095799, 110 6095799) Parts