Ratings submitted by customers like you who bought this part.
?
$34.66
In Stock
Fix Number:
FIX11741701
Manufacturer #:
WP3406107
Manufactured by:
Whirlpool
Works With Model IJ82001!
Product Description
This OEM dryer door switch is an on/off mechanism that detects when the door is open to prevent the dryer from operating. If your dryer will turn on but will not start or continues working while the door is open, you may have a faulty door switch. This part features the switch and three wires, is white in color, and measures 6.5 inches long. This switch replaces the two-wire switch that is on many models. You will find this part attached to the inside of the top end of the front panel. One end attaches to the wiring harness and the other goes through the panel to make contact with the door when the door is closed. This is a regular wear part due to such frequent use or continuous harsh handling. Depending on how the switch broke, it might make it impossible to start or stop your drying cycle. You can test the function of this part by pushing on the black tab that sticks out of the front panel to make contact with the dryer door. If there is no resistance in the tab and it does not make a clicking sound, it likely needs to be replaced.
Works with the following brands:
Whirlpool, Kenmore, Maytag, KitchenAid
Works with the following products
Dryer, Washer Dryer Combo
Fixes the following symptoms
Running With Door Open, Won’t Start, Door won’t close, Will Not Start
This OEM dryer door switch is an on/off mechanism that detects when the door is open to prevent the dryer from operating. If your dryer will turn on but will not start or continues working while the door is open, you may have a faulty door switch. This part features the switch and three wires, is white in color, and measures 6.5 inches long. This switch replaces the two-wire switch that is on many models. You will find this part attached to the inside of the top end of the front panel. One end attaches to the wiring harness and the other goes through the panel to make contact with the door when the door is closed. This is a regular wear part due to such frequent use or continuous harsh handling. Depending on how the switch broke, it might make it impossible to start or stop your drying cycle. You can test the function of this part by pushing on the black tab that sticks out of the front panel to make contact with the dryer door. If there is no resistance in the tab and it does not make a clicking sound, it likely needs to be replaced.
Works with the following brands:
Whirlpool, Kenmore, Maytag, KitchenAid
Works with the following products:
Dryer, Washer Dryer Combo
Fixes the following symptoms:
Running With Door Open, Won’t Start, Door won’t close, Will Not Start
Part# WP3406107 replaces these:
AP6008561, 3405100, 3405101, 3406100, 3406101, 3406107
...
Show more, 3406109, W10569603, WP3406107VP, WPW10569603 Show less
Videos For installing this part.
Replacing your Dryer Door Switch
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
February 9, 2022
DRYER TURNS ON , WHEN YOU PUSH THE BUTTON TO START IT WONT COME ON
For model number NED5700BWO
Hello George, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the dryer door switch, the thermal fuse, the high limit thermostat and thermal cut off, and the electronic control. You can test the parts with a multimeter. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Very easy, whirlpool replaced the 2 wire switch with a 3 wire switch. After calling this site, and Whirlpool about the new 3 wire harness, they said it would work fine, which it did.
The light wouldn't come on and the dryer didn't stop when door opened.
I watched the video showing the repair sequence and followed the directions. It was surprisingly easy except for separating the door switch plug from the main connection. Someone had mentioned using pliers to pull the two sections apart so that's what I did. Then I did a little victory dance when I put it all together and the dryer worke
... Read mored perfectly. Not bad for an 83 year old lady.
The dryer continued to spin when the door was open and the light wouldn’t come on.
I watched a 3-5 minute video (a link from your website) when I ordered the part and it literally took less than ten minutes to complete the repair-very simply. And it works like new now. Thank you.
Disconnect dryer from electrical outlet, and follow the video instructions..... it cannot get any easier than this.... absolutely simplistic and flawless repair.
I watched the short film, which was very helpful. I used a putty knife to lift the lid as the film showed, and then followed the very exact, simple instructions. Worked perfectly.
The thermal fuse was not the problem for me. I replaced the push to start and that was not the problem either. When I removed the timer it ratttled a little. I ordered it (over$100) and put it in like they said, remove one old wire and connect one new wire because there are a lot of wires. I was thrilled that it worked All worth the wait
... Read moreing for parts with no working dryer for a total of a week. All the parts I used are easy to do but you have to go step by step and be careful with the screws and gentle removing the wires since they can be tough to get off. I'm so excited to have a dryer working again!
Step 1: Unplug electrical power. Step 2: Remove lint filter. Step 3: Carefully remove the two screws you can see where the lint filter fits, being careful not to let them drop into the hole (#2 Phillips screwdriver). Step 4: Push a large flat screwdriver under the edge of the top of the machine at one of the front corners,
... Read moreand us the screwdriver as a lever to force the top of the machine up until the hidden catch about an inch in along the front loosens. Step 5: Do the same on the other front corner. Step 6: Use a scrap of wood to prop the top of the machine up so you can get at the switch (inside the front of the dryer, along the top of the door opening between the latch in the middle and the top right corner). Step 7: Unplug the switch at the connector about six inches from the switch. Step 8: Use a #2 Phillips screwdriver to remove the two screws holding the switch in place, saving the screws and making a note of which way around the switch sits .(Taking a photo might help). Save the screws. Step 9: Plug the new switch into the connector (see Step 7). Step 10: Use the smaller two screws to attach the switch to the front of the dryer (see Step 8). Step 11: Remove the wooden prop (see Step 6) and push down hard on the front of the top to make it latch onto the body of the cabinet. Step 12: Replace and tighten the two screw removed in Step 3, and push the lint filter back into its hole. Step 13: Connect the power and check that everything works properly
Read less
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
★
Customer Reviews
Average Rating:
(11 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
5★
11
4★
0
3★
0
2★
0
1★
0
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jerry B - March 2, 2022
Verified Purchase
Dryer Door Switch
Switch was a direct OEM part to replace the door switch.
Delivery was very quick & switch functions perfectly.
This is the second replacement part I purchased. First was a utensil tray for our dish washer. Again a direct OEM part that fit perfectly.
Will definitely sue Fix.com for future requirements.
★★★★★
★★★★★
JENNIFER H - August 26, 2021
Verified Purchase
My dryer is 18 years old, it was great to find a part so that it may live 18 years more!
As advertised. Simple fix and inexpensive too!
★★★★★
★★★★★
Patricia D - August 18, 2021
Verified Purchase
Perfect
Part came in just a few days. My husband helped me get the old one out and install the new one. Very easy very self explanatory. So glad I troubleshot the problem and could repair it ourselves. When all done I turned to my husband and said that will be $65 please. I'm sure that is what a repair man would charge plus hiking the price up on the part.
Thanks. I'll remember you for future repairs.
★★★★★
★★★★★
Janice L - June 16, 2021
Verified Purchase
Dryer Door Switch
The part was received in a very timely manner, earlier than expected and was easy to install.
★★★★★
★★★★★
Valerie B - February 18, 2021
Verified Purchase
So easy
The part was easily replaced by myself. :). I watched a YouTube and had it changed out in about 20 minutes. Works great. The diagram of parts made it easy to find the part I needed. Thank you.
★★★★★
★★★★★
Steve W - September 11, 2020
Verified Purchase
easy fix
The part was perfect. I fixed my dryer myself for about $30, and I am not very mechanical. It would have been $200 or so had I called the repairman.
★★★★★
★★★★★
Ray S - July 11, 2020
Verified Purchase
Outstanding service
The timeliness and part description provided served the repair flawlessly.
My true appreciation.
★★★★★
★★★★★
Cheri R - September 18, 2019
Verified Purchase
Worked great
Easy to install and now my dryer works!
★★★★★
★★★★★
Peter W - September 18, 2019
Verified Purchase
Worked Great
Exactly as advertised.
★★★★★
★★★★★
Jacquelyn B - June 6, 2019
Verified Purchase
Dryer Door Switch
The part arrived promptly and was easy to install.
< Prev
1
2
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11741701
Manufacturer Part Number: WP3406107
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.