Drum Felt Seal WP31001747
Works With Model LNC8435A80!
$39.84
In Stock
- Fix Number:
- FIX11740735
- Manufacturer #:
- WP31001747
- Manufactured by:
- Whirlpool
Works With Model LNC8435A80!
Jump to:
Product Description
Depending upon your model, this seal can be used on either the front or rear drum. The hi-temp adhesive is sold separately.
-
Works with the following brands:Norge, Maytag, Magic Chef, Crosley
-
Works with the following products:Dryer
-
Fixes the following symptoms:Noisy, Marks left on clothes
-
Part# WP31001747 replaces these:AP6007618, 31001548, 31001747, 53-0218, 53-0249, 53-0281 ... Show more , 53-1756 Show less
- Works with the following brands:
- Norge, Maytag, Magic Chef, Crosley
- Works with the following products
- Dryer
- Fixes the following symptoms
- Noisy, Marks left on clothes
- Part# WP31001747 replaces these:
- AP6007618, 31001548, 31001747, 53-0218, 53-0249, 53-0281, 53-1756
Part Number Cross Reference
Videos For installing this part.
Replacing your Drum Felt Seal
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- john from manorville, NY
- Parts Used:
- WPY055980, WP31001747
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
my dryer started making noise, rough metal on metal sound and clothes took a couple cycles to dry.
Looked in the back of the dryer and rear drum felt was already falling apart so I ripped it out. We actually ran it a couple times without the felt ( do not do this!) Wound up grinding off some metal. My advice is look up a video on whatever repair your doing. Once I removed the drum my felt seal unlike most videos I watched attached to t
... Read more
he back of my dryer and not to the drum itself. Scrape off old adhesive and apply new adhesive which will be recommended if your purchasing felt.my felt seal once its glued on it folds over itself. Slide drum over felt reattach your belt and even with my grinded out metal it ran like new.This site made my repair easy with timely delivery and helpful videos. Hope this helps someone.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JOHN from Lakewood, CO
- Parts Used:
- WP31001747
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Dryer leaving rust streaks on white laundry
The video was exactly right for installing the upper drum glide. Getting the front off of the machine took less than 5 minutes. The old glide and felt peeled off easily. I used a putty knife and a file rasp to remove the old glue. Used denatured alcohol to wipe away any residual dust and pieces of glue. Applied the glue in two parallel li
... Read more
nes where the new glides and pad install. Waited about a minute for the glue to get tacky, then placed new part on the upper door opening. To hold it down, I used an adjustable 1.5 inch wide nylon tie down strap around the entire circumference of the door opening and ratcheted it down tight for overnight. Next morning took off the strap and repair was tight. If you are going to replace the upper glide, go ahead and do the lower seal as well. If the upper is worn out, the lower will be worn out of shape and won't seal right with a new one only on the top. Repair time 30 minutes from open to close, with 12 hours glue drying time in between.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11740735
Manufacturer Part Number: WP31001747
Manufacturer Part Number: WP31001747
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.