Part Location Diagram of 6931EL3003D LG Thermal Fuse
See part F130 in the diagram
Replacing your LG Dryer Thermal Fuse
( Grid squares measure 1x1 inch )

Thermal Fuse

Works With Model DLEX3370V!
★★★★★
★★★★★
4 Reviews

Rated by 3 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$23.65
In Stock
Fix Number: FIX3530485
Manufacturer #: 6931EL3003D
Manufactured by: LG
Works With Model DLEX3370V!

Product Description

If your dryer is not turning on, or not heating up, there could be an issue with your thermal fuse. This OEM fuse is designed to act as a high-limit thermostat, and will turn off the heating element in your dryer if the appliance overheats. It does this by cutting off power to the dryer. If the fuse has blown, it will need to be replaced as they cannot be reset. You can test the fuse with a multimeter, and should receive a reading of 0 ohms of resistance if the fuse is still good. A common reason for a dryer to overheat is if the air vents are blocked, as the hot air is contained in the dryer causing the fuse to blow. Be sure to keep your dryer filter and vents clean of lint and other debris to prevent this from happening.

Videos For installing this part.

Replacing your Thermal Fuse

Replacing your Thermal Fuse

Replacing your Thermal Fuse

Replacing your Thermal Fuse

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
February 9, 2022
1. My dryer has power but will not start. 2. I can hear a click when I press the (play/pause) START button. 3. I did clean the duct work in the wall all the way to the roof HEAVY LINT. 4. Lastly, disassembly video would be a help. Any advice greatly appreciated. Thanks very much.
For model number DLEX4270V
Hello James, thank you for your question. There could be a few reasons why your dryer will not start. The dryer won't start if the door switch senses that the door is open. To test your door switch, set your multimeter to the lowest position for ohms of resistance. Touch the black meter probe to one metal prong on the switch and the red probe to the other. Press in on the switch pole. If the meter doesn't change, the switch is bad and needs to be replaced. Part number FIX3529308. It could also be the push to start button, part number FIX11708666 or the timer part number FIX11710909. We hope this helps. Unfortunately, we do not have a video. Good luck with your repair!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.6 / 5.0, 3 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Richard from Harrison, OH
  • Parts Used:
    6931EL3003D, 6931EL3001E
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
No heat
Removed screw holding vent tube, pulled vent tube out. The thermal fuse and thermostat assy are left of inside the hole on the back of the dryer where the vent tube came out. The screws are easy to take out with one hand using a phillips screwdriver. I had to use a long screwdriver because the drum was in the way with a shorter one. The screws were pretty tight, so use a phillips with a good point, dont want to strip the screws. Because i can only get one hand in there, it was a little tricky getting the new parts lined up and starting the first screws at the same time, that took a little while but I finally got them started. If i couldnt get the first screws started i was goint to cut the bottom holes on the brackets for the parts, start the screw, slip the bracket onto the screw and then start the second screws. I used a magnetic flashlight inside the dryer, could put it in different places to see better in there. I should have put a few layers of masking tape arround the vent hole edge, its pretty sharp and when i was done i realised i had cut my arm on that edge. Dryer works again and dear Wife is happy.. I did test the old parts, thermal fuse was blown, probably because of too much lint in the flexable dryer hose, i shoulda replaced the dryer hose sooner.
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    david from Winfield, WV
  • Parts Used:
    6931EL3003D
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
No heat when dryer runs
At first, I could not find a video on an older model dryer with controls on the back. Once I watched a video (on youtube) that showed a dryer with controls on the back (not an LG), I figured out how to get where I needed. The diagrams on the website showed me where I needed to find my part (thermostat) and from there it was easy. I started with the troubleshooting comments (least expensive first, obviously) and if that didn't work, I would work my way up to replacing the entire heating element. Once I put the part in and put it all back together, it is running more quietly and drying just like it used to. One small investment ($4.61 plus shipping) , an afternoon repairing myself, and I saved a TON of money (in repairman coming or purchasing a new dryer)!! Thanks for supplying troubleshooting help AND video support . Will definitely use this site from now on !
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    JOHN from Petaluma, CA
  • Parts Used:
    6931EL3003D, 6931EL3001F
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
ran but no heat
Check it out on You Tube and then proceed. Although the parts were very small and inexpensive there was much sheet metal to remove to get at them. This actually afforded and good opportunity to thoroughly clean the rollers and vacuum all the accumulated lint.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (4 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    4
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Model Compatibility
This part works with the following models:
Fix Number: FIX3530485
Manufacturer Part Number: 6931EL3003D
Brand
Model Number
Description
LG
61412
Dryer - LG Dryer Model 61412 Parts
LG
61422
Dryer - LG Dryer Model 61422 Parts
LG
61423
Dryer - LG Dryer Model 61423 Parts
LG
61452
Washer Dryer Combo - Washer-Dryer
LG
61462
Dryer - LG Dryer Model 61462 Parts
LG
61463
Dryer - LG Dryer Model 61463 Parts
LG
61513
Dryer - LG Dryer Model 61513 Parts
LG
61522
Dryer - LG Dryer Model 61522 Parts
LG
61523
Dryer - LG Dryer Model 61523 Parts
LG
61552
Dryer - LG Dryer Model 61552 Parts
LG
61553
Dryer - LG Dryer Model 61553 Parts
LG
61622
Dryer - LG Dryer Model 61622 Parts
LG
61623
Dryer - LG Dryer Model 61623 Parts
LG
69272
Dryer - LG Dryer Model 69272 Parts
LG
69278
Dryer - LG Dryer Model 69278 Parts
LG
69472
Dryer - LG Dryer Model 69472 Parts
LG
69478
Dryer - LG Dryer Model 69478 Parts
LG
706574
Washer Dryer Combo - Washer-Dryer
Kenmore
79661522210
Dryer - Kenmore Dryer Model 796.61522210 (79661522210, 796 61522210) Parts
Kenmore
79669002000
Dryer
Kenmore
79669002010
Dryer
Kenmore
79669272000
Dryer
Kenmore
79669272010
Dryer
Kenmore
79669272012
Dryer
Kenmore
79669272900
Dryer
Kenmore
79669278000
Dryer
Kenmore
79669278010
Dryer
Kenmore
79669278900
Dryer
Kenmore
79669472000
Dryer
Kenmore
79669478000
Dryer