We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
April 28, 2023
How do I remove the cover to get inside the dryer. My controls are on the top back of the dryer
For model number dlg50002w
Hello Robert, thank you for contacting us. We have researched the model and would suggest following these general instructions to disassemble your dryer: First, remove the top plate assembly by inserting a butter knife at each corner to push the tabs inside, which then releases the top assembly. Slightly push the butter knife upwards and take the top panel off. Next, to disassemble the front panel, remove the shutoff switch by holding it from the inside using a plier. Remove all the screws holding the front panel on the top and front side. Lift the door to disengage it from the door pegs. To get assess to the control panel, the top rear plate might need to be disassembled by removing the screws and wiring connections. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
If the drum in your dryer will not tumble, or it is noisy while operating, there may be an issue with the drum belt. The belt is found looped around the dryer drum, a tension pulley, and a motor pulley and is used to rot...
This is replacement high temperature adhesive for your washer and dryer. It is designed to hold objects together, and will not disintegrate at a high temperature. This is a 2-ounce tube of adhesive that is sold individua...
The drum roller for your dryer holds the drum in place while the drum turns on the support wheels. The drum roller is round with a bearing in the middle and measures approximately 3 inches in diameter. Over time, these r...
Model Compatibility
This part works with the following models:
Fix Number: FIX3522851
Manufacturer Part Number: 4036EL3001A
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
