Have you ever purchased from us before?
Thank you for helping make our site better.
Manufacturer #: 349241T /
Manufactured by: Whirlpool /
Fix #: FIX347627
Manufacturer #: 349241T |
Manufactured by: Whirlpool |
Fix #: FIX347627
Step 1: removed power source.Step 2: removed screws from lent catcher.Step 3: removed top lid. Step 4: removed front panel.Step 5: removed drum.Step 6: removed plastic washers. Step 7: removed old wheels.Step 8: installed new wheels.Reversed steps to put everything back.
Were these instructions helpful?
Pulled belt off rollers removed drum from dryer then replaced. Removed bad roller. Hardest part was getting the triangle past the first groove to the second. Cleaned shaft with towel and greased with lithium then put roller and second triangle on. Put drum back in and hook belt back on. I watched a video on you tube that showed step by step.
I called my boyfriend
Disconnected electricity Removed top and front panel Remove the drum and rollers are easily replaced Easy fixAnyone can do.
Unplugged appliance, lifted dryer lid, took front off, relpaced rollers, belt, idler arm.The dryer is much quieter running.
Replaced the wheel that holds the drum
I replaced the drum rollers, belt and idler pulley, I had an 80-90% chance that it would fix the issue. The video on the website was spot on in every phase of the repair - just follow it as shown. By spending $45, I bet I'll get many more years out of this machine.
Repair was made so easy with the video! I found the repair video on youtube first and ordered the parts from partselect. The parts arrived very quickly. I watched the video again to make sure I knew what I was doing, took the dryer apart, and had the new rollers installed, dryer put back together, and clothes drying in about half an hour. Thanks so much!
Nephew came and repaired hit for me, it went very easy, it was all done with a hour
A post-workout recovery plan to help you get the most out of your…