Part Location Diagram of 279570 Whirlpool Door Catch Kit
See part 38 in the diagram
Replacing your Kenmore Dryer Door Catch Kit
( Grid squares measure 1x1 inch )

Door Catch Kit 279570

Works With Model IJ82001!
★★★★★
★★★★★
11 Reviews

Rated by 27 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$5.04
In Stock
Fix Number:
FIX334230
Manufacturer #:
279570
Manufactured by:
Whirlpool
Works With Model IJ82001!

Product Description

This kit includes two door strikes, and three door catches, to service doors that have one or two catches. The strike is mounted on the body of the dryer, while the catch is mounted on the dryer door. These two parts work together to keep the dryer door shut while in operation. If your appliances lid will not close, or it will not start, it may be time to replace the door catch. If this part is malfunctioning, it should be replaced immediately, as it is not safe to run a dryer with the door not properly closed. This kit also comes with a set of instructions to help with the repair.

Videos For installing this part.

Replacing your Door Catch Kit

Replacing your Door Catch Kit

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gerald
April 2, 2023
What part number for door latch
For model number 11068002010
Fix.com logo
Hi Gerald, thank you for reaching out. Based on our research, the part you are looking for is the door latch, part number FIX334230. We hope this helps!

Was this helpful?
Thank you for voting!
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.5 / 5.0, 27 reviews.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
jeffrey from Brookhaven, PA
Parts Used:
WP8577274, WP3390719, WP3387747, 279769, 279570
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
Dryer would run, but not heat
Needed it running quick, so no diagnostics. Ordered one of everything that could fix problem (plus a new door catch). Tipped it onto it's back & popped the bottom cover off. Element, thermal cutoff, thermistor, and fuse. were right in front and held by 2 screws each (don't drop them, don't ask). A little bit tight inside, but no big issu e. vacuumed the inside, replaced everything (it was the Heating Element, by the way), slapped the cover on, and put it back in its spot. works like it was new. Yes, I unplugged it first. Remember! Safety Third!
22 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathryn from Endwell, NY
Parts Used:
279570
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Dryer Door Popped Open
After watching the instructional video, I removed the male portion of the door catch with pliers and replaced them with the new parts. It only took a few minutes. I didn't need to replace the female side and the door is closing fine!! Much cheaper and faster than calling the repair person we used last time!
16 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
MARK from Tucson, AZ
Parts Used:
WP8577274, WP3406653, WP3392519, WP3387223, 279570
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Dryer shut off early
Removed front bottom and replaced parts
8 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kimberly from Detroit, MI
Parts Used:
279570
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The door latch was broken and needed to be replaced.
My husband removed the door, found the old latch and removed it with tweezers. He used the instructions in the package to figure out which latch to use. He put in the new latch and the door was fixed. I believe he watched a video showing how to do the repair, which helped.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jared from Fanwood, NJ
Parts Used:
279570
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Dryer door was not closing
The old catch was broken. I pulled it out with a screw driver. The new one pushed into place. Job complete in 3 minutes
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from York, PA
Parts Used:
279570
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
The female side of the door catch was severely damaged
The catch was so damaged that I could remove it with a pair of needle nosed pliers, by grabbing the catch with the pliers and inserting the screw drivers on the sides of the catch to let the snaps that held the catch in place slide past the side of the hole in the door (I was hoping this would work as I didn't want to remove all of the sc rews that held the outside and inside parts of the doors together). Something like nail files might be needed instead of screw drivers as screw drivers may be too thick. The new catch then just popped into the vacated hole. The male side of the catch was okay, but I replaced it anyway as it simply required removing one screw. The new male side of the catch was provided by you as well as a new screw.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from SCOTTSDALE, AZ
Parts Used:
279570
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
door latch on dryer door would not stay shut during tumble dryer
Did NOT remove inner panel of Frontload Duet dryer door . Just pried one side of female latch open then used needle pliers to pull female latch assembly out and pushed new assembly in....worked great!
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Novato, CA
Parts Used:
279570
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Nylon part of catch broken
I replaced only the door catch, not the strike, because the strike was the same size as the two included in the kit, so no need to replace. I used #20 yellow catch, but the other two in the kit would also work. The online video instructions were excellent.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alicia from Centralia, MO
Parts Used:
WPW10310366, 279570
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
hinge broke, door catch also broke.
Removed the door, look apart the door to get to the hinge. Removed hinge and replaced it with new one. Put door back together. Replaced door catch. Put door back on dryer.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jessica from Madisonville, TN
Parts Used:
279570
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Wouldn't latch
Pulled out both parts. Popped in new parts worked like a charm??
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Customer Reviews
Average Rating: (11 Reviews)
4.9
★★★★★
★★★★★
Filter By Rating:
  • 5
    10
  • 4
    1
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2

Model Compatibility

This part works with the following models:
Fix Number: FIX334230
Manufacturer Part Number: 279570
Brand
Model Number
Description
Kenmore
106508802
Dryer - Kenmore Dryer Model 106.508802 (106508802, 106 508802) Parts
Kenmore
10686294140
Dryer
Kenmore
10686294340
Dryer
Kenmore
10686294540
Dryer
Kenmore
10686294740
Dryer
Kenmore
10686294840
Dryer
Kenmore
10687884100
Dryer
Kenmore
10687884300
Dryer
Kenmore
10687884600
Dryer
Kenmore
10688419100
Dryer
Kenmore
10688419300
Dryer
Kenmore
10697502820
Dryer - Kenmore Dryer Model 106.97502820 (10697502820, 106 97502820) Parts
Kenmore
110088732791
Washer Dryer Combo
Kenmore
1101820299
Washer Dryer Combo - WASHER DRYER LAUNDRY SYSTEM
Kenmore
110508802
Dryer
Kenmore
11060012000
Dryer
Kenmore
11060012001
Dryer
Kenmore
11060012002
Dryer
Kenmore
11060022010
Dryer
Kenmore
11060052990
Dryer
Kenmore
11060052991
Dryer
Kenmore
11060056990
Dryer
Kenmore
11060056991
Dryer
Kenmore
1106007299
Dryer - Kenmore Dryer Model 110.6007299 (1106007299, 110 6007299) Parts
Kenmore
11060072990
Dryer
Kenmore
11060072991
Dryer
Kenmore
1106007713
Dryer
Kenmore
1106007714
Dryer
Kenmore
1106007715
Dryer
Kenmore
1106007716
Dryer