Part Location Diagram of 49621 Whirlpool Leveling Foot
See part 8 in the diagram
Replacing your Kenmore Dryer Leveling Foot
( Grid squares measure 1x1 inch )

Leveling Foot

Works With Model MDE22PDBZW0!

Rated by 1 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$11.40
In Stock
Fix Number: FIX1609293
Manufacturer #: 49621
Manufactured by: Whirlpool
Works With Model MDE22PDBZW0!

Product Description

It is important for your dryer to be properly leveled, as an unleveled one can cause excessive vibration and noise when operating, may not drain properly, and can cause excessive wear on various parts. A basic bubble level can be used to check that your appliance is good to go, and if it needs adjustments these leveling feet are what you need. There is a foot located at each corner of your dryer, that can be adjusted individually to ensure your appliance is balanced. If your dryer is wobbly, and has become noisy and excessively vibrating when it is running, one of these feet may be damaged and needs replacing. This OEM part is sold individually, so if you need to replace more than one foot be sure to order the correct quantity. They are approximately two inches in length, one inch wide, and are made of a threaded white plastic.

Videos For installing this part.

Replacing your Leveling Foot

Replacing your Leveling Foot

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.4 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    michael from Tampa, FL
  • Parts Used:
    8547174, 49621
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
Dryer had a very loud squealing sound
Remove 2 screws in the lint catcher push in on the clips in the front corners with a slim screwdriver to flip the top up then remove the two 5/16th bolts on either side to release the front of the dryer lifting slightly to remove the front then tilt dryer back so your not on the floor. Then remove the tension spring remove the bolt 3/8 remove the idler pully bracket then reverse to put back together after aligning the belt
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Model Compatibility
This part works with the following models:
Fix Number: FIX1609293
Manufacturer Part Number: 49621
Brand
Model Number
Description
Kenmore
10686294140
Dryer
Kenmore
10686294340
Dryer
Kenmore
10686294540
Dryer
Kenmore
10686294740
Dryer
Kenmore
10686294840
Dryer
Kenmore
10687884100
Dryer
Kenmore
10687884300
Dryer
Kenmore
10687884600
Dryer
Kenmore
11060012000
Dryer
Kenmore
11060012001
Dryer
Kenmore
11060012002
Dryer
Kenmore
11060022010
Dryer
Kenmore
11060052990
Dryer
Kenmore
11060052991
Dryer
Kenmore
11060056990
Dryer
Kenmore
11060056991
Dryer
Kenmore
11060072990
Dryer
Kenmore
11060072991
Dryer
Kenmore
11060092990
Dryer
Kenmore
11060092991
Dryer
Kenmore
11060094990
Dryer
Kenmore
11060094991
Dryer
Kenmore
11060096990
Dryer
Kenmore
11060096991
Dryer
Kenmore
11060097990
Dryer
Kenmore
1106012510
Dryer - ELECTRIC DRYER
Kenmore
11060172000
Dryer
Kenmore
11060172001
Dryer
Kenmore
11060172002
Dryer
Kenmore
11060182000
Dryer