11742505-1-M-Whirlpool-WP4391960-Heating Element
Part Location Diagram of WP4391960 Whirlpool Heating Element
See part 5 in the diagram
11742505-1-S-Whirlpool-WP4391960-Heating Element 360 view
( Grid squares measure 1x1 inch )
11742505-1-S-Whirlpool-WP4391960-Heating Element 11742505-2-S-Whirlpool-WP4391960-Heating Element 11742505-1-S-Whirlpool-WP4391960-Heating Element 360 view
Part Location Diagram of WP4391960 Whirlpool Heating Element

Heating Element

Rated by 8 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$54.87
In Stock
Fix Number: FIX11742505
Manufacturer #: WP4391960
Manufactured by: Whirlpool
  • Product Description

    This heating element is a genuine OEM replacement part for your electric dryer. This element carries 5200W and 240V. A controlled electrical current passes through the coils, and the heat that is produced is then used to dry your laundry. If your dryer is running but not producing heat, there may be an issue with the element. Before beginning this repair, please be sure to disconnect the power supply to your dryer. You will need to pull the dryer out far enough to easily access the back panel in order to complete this repair. Please note that they part does not include the two terminals and two adapter leads, these parts must be purchased separately.

  • Works with the following brands
    Kenmore, Whirlpool, Roper, Speed Queen
  • Works with the following products
    Dryer, Washer, Range
  • Part Number Cross Reference
    Part# WP4391960 replaces these:
    AP6009347, 2013, 279218, 279247, 279248, 279410, 279411, 279455, 279478, 279598, 279698, 337378, 337430, 339655, 340468, 348774, 348775, 349542, 349543, 349545 ... Show more , 349546, 4391960, 660933, 660965, 660982, 685182, 685942, 689805, 689980, 690241, 690983, 691724, 692758, 693061, 693062, 693295, 693297, 693298, 693299, 693300, 696324, 696326, 696579, 697290, 786077, 8218, WP4391960VP Show less
1 Related Part 1 Question and Answer
8 Installation Instructions Model Compatibility
Product Description Questions and Answers Related Parts Installation Instructions Model Compatibility

Product Description

This heating element is a genuine OEM replacement part for your electric dryer. This element carries 5200W and 240V. A controlled electrical current passes through the coils, and the heat that is produced is then used to dry your laundry. If your dryer is running but not producing heat, there may be an issue with the element. Before beginning this repair, please be sure to disconnect the power supply to your dryer. You will need to pull the dryer out far enough to easily access the back panel in order to complete this repair. Please note that they part does not include the two terminals and two adapter leads, these parts must be purchased separately.

  • Works with the following brands:
    Kenmore, Whirlpool, Roper, Speed Queen
  • Works with the following products:
    Dryer, Washer, Range
  • Part# WP4391960 replaces these:
    AP6009347, 2013, 279218, 279247, 279248, 279410 ... Show more , 279411, 279455, 279478, 279598, 279698, 337378, 337430, 339655, 340468, 348774, 348775, 349542, 349543, 349545, 349546, 4391960, 660933, 660965, 660982, 685182, 685942, 689805, 689980, 690241, 690983, 691724, 692758, 693061, 693062, 693295, 693297, 693298, 693299, 693300, 696324, 696326, 696579, 697290, 786077, 8218, WP4391960VP Show less

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Henryford
December 14, 2022
Does this heating element fit my Whirlpool dryer model number LE7680xsn2?
For model number LE7680XSN2
Hi Henryford, thank you for your inquiry. Yes, this heating element will fit your model. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.

Was this helpful?
Thank you for voting!
  • 1
Heating Element Connection Wire Kit
$11.06
Part Number: FIX334206
This heating element connection wire kit is a genuine OEM replacement for your electric dryer. The kit is used to connect the thermostat to the heater element. The kit comes with a yellow wire nut and a wire that measure...
$11.06
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.0 / 5.0, 8 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Steve from South Lake Tahoe, CA
  • Parts Used:
    4392065, WP4391960, 279318
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Defective heater element dryer still runs.
Expect to spend a lot of time on your knees. Unplug appliance. Remove dryer hose. remove back cover 4-6 7mm bolts. Unplug dryer heater element connections 2 blade or pin connectors. Unbolt element cover and remove old element. Label wires. Hopefully the replacement connections match if not go to hardware store. Crimp or better solder on new connectors. Install element in housing and reattach. Clean out all old dirt and lint. check old belt for wear and re-grease drum roller shafts. re-install back cover, hose and plug in. enjoy you just saved $600
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Bryan from Houston, TX
  • Parts Used:
    WP4391960
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set, Wrench set
Dryer turns no heat
Used previously published instructions linked to the parts order on your site to replace the furnished heating element.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Phillip M from Remlap, AL
  • Parts Used:
    WP4391960, 279769
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Dryer ran But No Heat
Removed Dryer Back And Checked Parts With An Ohm Meter. Found Parts Were Open.Dryer Vent To Outside Was Stopped Up.Cleaned Out Lint. Replaced Parts Unit Runs Fine Now
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    John from Federal Way, WA
  • Parts Used:
    WP4391960
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
bottom of heating element wouldnt fasten
used a piece of tin to snug down and hold screw in place.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Victor from Cottage Grove, OR
  • Parts Used:
    WP4391960
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
the heating element broke
My model is so old that it is not listed. I got a heater element that was similar to the old one, but one of the legs was too long. I needed to bend it and I needed to get some flat blade connectors from the hardware store ($1.50).
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Dave from Sandt, UT
  • Parts Used:
    WP4391960
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
Dryer worked fine, just no heat.
Followed the directions provided with the order. they were very helpful until I got to the point that wanted me to "Remove screw at the top". The instructions did not indicate that, at least for my model, said screw was behind a panel and was difficult to find. Once i found it, I needed a long shaft screw driver to remove the screw. The repair went as directed, until I needed to replace the hidden screw. The bracket needed to be aligned with the hole, and the screw installed. I was able to do this with a tool I have I call a screw holder. then it all went well. also, the heating element arrived a day early. My wife loved that part. Thanks.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Calvert from Dunsmuir, CA
  • Parts Used:
    WP4391960
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
it was the Fuse that went out.
Just took off old part and put on new parts
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Paul from Middletown, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Wrench set
Dryer blowing cold air
After watching each Youtube video on how to replace the parts, I dove in. The guy in the video makes it look very easy, and it is! My biggest issue was finding enough room in the laundry room. Once I got the back off, everything went quickly. Replaced the Thermal fuse, Thermostat and Cut off Kit, in less than 20 minutes. The heating element had one quirk, the screw holding everything together was facing the opposite direction. That ate up up a half hour of trying to get my hand in from the front. But the element slid right in place. I closed everything up and switch the dryer on. Runs Fantastic! It's a brand new machine.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Model Compatibility
This part works with the following models:
Fix Number: FIX11742505
Manufacturer Part Number: WP4391960
Brand
Model Number
Description
Kenmore
10686294140
Dryer
Kenmore
10686294340
Dryer
Kenmore
10686294540
Dryer
Kenmore
10686294740
Dryer
Kenmore
10686294840
Dryer
Roper
1093B1A
Wall Oven - Range (gas)*
Roper
1093B3A
Wall Oven
Kenmore
1106618240
Dryer
Kenmore
1106618241
Dryer
Kenmore
1106618242
Dryer
Kenmore
1106618250
Dryer
Kenmore
1106618251
Dryer
Kenmore
1106618252
Dryer
Kenmore
1106708500
Dryer
Kenmore
1106708501
Dryer
Kenmore
1106708600
Dryer
Kenmore
1106708610
Dryer
Kenmore
1106708611
Dryer
Kenmore
1106708620
Dryer
Kenmore
1106708622
Dryer
Kenmore
1106718500
Dryer
Kenmore
1106718501
Dryer
Kenmore
1106718502
Dryer
Kenmore
1106718503
Dryer
Kenmore
1106718504
Dryer
Kenmore
1106808500
Dryer
Kenmore
1106808501
Dryer
Kenmore
1106808600
Dryer
Kenmore
1106808601
Dryer
Kenmore
1106808700
Dryer