The push-to-start switch is a genuine OEM part for your dryer. When the button is pressed and released, it activates the dry cycle for your laundry. If your dryer will not start or it shuts off too soon, there may be an issue with the start switch and it should be replaced. Please be sure to disconnect the power supply to your dryer before beginning this repair, as you will be working with electrical components.
Works with the following brands:
Kenmore, Whirlpool, Roper, Estate
Works with the following products:
Dryer, Washer Dryer Combo
Fixes the following symptoms:
Won’t Start
Part# WP3977456 replaces these:
AP6009036, 3977456
Works with the following brands:
Kenmore, Whirlpool, Roper, Estate
Works with the following products
Dryer, Washer Dryer Combo
Fixes the following symptoms
Won’t Start
Part Number Cross Reference
Part# WP3977456 replaces these:
AP6009036, 3977456
Videos For installing this part.
Replacing your Push-To-Start Switch
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anthony
May 20, 2023
Will Fix # 11742178 /part #wp3977456
Work on a roper electric dryer switch #
ESP 3977456 1131 / 11198-62
Dryer model # red 4440vq1
For model number Wp3977456
Hello Anthony, Thank you for your inquiry. We confirm that this is the compatible push to start switch for your model. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Stu
October 9, 2023
My Admiral dryer was purchased in 2008. I'm having a difficult time removing the switch. Don't want to force it...a helpful tip would be great! The plastic housing is the issue.
For model number AED4475TQO
Hello Stu, thank you for reaching out. To remove the switch, you may need to follow these instructions:
1. First, remove the start knob by simply pulling it out.
2. Remove the back panel by unscrewing all the screws on it.
3. Lower the back panel and take the switch out by prying down on the little release tab on top with the help of a screwdriver.
4. Pop the wires out of the switch with the help of a screwdriver.
5. Install the new switch by reversing the same procedure.
Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
The dryer thermal fuse, also sometimes referred to as the thermal cut off or temperature fuse, is a 2 by 1/2-inch, white, plastic safety mechanism that halts the flow of electricity to the motor circuit when a dryer over...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
This was a 2-step repair. First I replaced the door switch, because the light would not come on when the door was opened... that solved that problem in about 5 minutes - repair was very easy it required a philips screwdriver and a putty knife. Didn't solve the starting/keep running problem. Ordered a new start button... again the repla
... Read morecement was really very easy, (philips screwdriver and needle nose pliers) - button design was changed from mine, but only caused confusion for a few minutes. But, BUMMER, the dryer still did not run correctly. Son had an inspiration... he rotated every knob several times and voila! Problem was probably contact corrosion. The door switch was necessary, but the start switch probably was not. For now the dryer is working well. No more clothesline! I would recommend this site to anyone for their help and the informative videos they include with your order.
well really easy . after I review some of the clients feedback I start with the door and button switches, then watch the videos. later install the same way the thermostat and the temperature thing. and boom it work, thanks for the videos. Sincerely, Enrique
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.