Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
October 25, 2022
Dryer. PTS start switch pressed in, motor (drum turns) starts, let go of switch, motor stops. Is it the switch (3977456) or the motor relay (3405281) needs replacement? Please advise. Thank you
For model number 110.73942101
Hello Barry, thank you for your question. The most probable cause of the issue you described is a faulty push-to-start switch, part number FIX11742178. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Replaced five parts and then finally went up on the roof to inspect the 3" exhaust pipe. The cap was clogged. It was the four-side-slot type for keeping out weather. I replaced it with a two 90 deg L's with output pointing downward. That's wide open 3" diameter and should not clog up again.