Maytag/Maytag_Thumb/4Y9PGRQW.gif
See part 16 in the diagram
Replacing your Kenmore Dryer Push-To-Start Switch - 2 Terminal play video
( Grid squares measure 1x1 inch )

Push-To-Start Switch - 2 Terminal

$49.86
Fix Number: FIX11741476
Manufacturer #: WP3395382
Manufactured by: Whirlpool

Product Description

This part is used to start the dryer once you have selected a setting on the timer.

Videos For installing this part.

Replacing your Push-To-Start Switch - 2 Terminal

Replacing your Push-To-Start Switch - 2 Terminal play video
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.7 / 5.0, 4 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Anthony from Hewitt, TX
  • Parts Used:
    WP3395382, WP3392519
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Dryer would not turn on.
3 days before Christmas dryer dies, I pulled up Partselect website, I watched a few videos and ordered the parts they listed. I also called to get see what a service charge would cost, $80.00 without parts?? Forget that, I spent under $50.00 for 3 parts, I used the two listed and boom it was fixed, I kept the 3rd part for a rainy day, I used the vac to clean up the extra lint that gets behind the panel, they saved my X-Mas budget and year, thanks for the great video and fast shipping.Tony in Texas!!
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Lynette from SAN ANTONIO, TX
  • Parts Used:
    8575007, WP3395382
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
dryer started running without pressing start button
Lots of people have described how easy it is to replace this part, but they made the assumption you knew how to get the end caps off. I'm such a newbie, I wasted alot of time figuring that out. Here's a link to the video that showed me how super simple that is: https://www.youtube.com/watch?v=e6cMej-C1XQ Just get your fingernails into the top edge of the plastic end caps and pull toward you to pop them off. The two Philips head screws that hold the control panel are located at the bottom of the area hidden by those end caps. Remove these. Remove the start button by gently pulling it toward you. You can now pull the bottom of the control panel toward you and flip it up on its hinges and out of your way. The start switch is held in place by a small plastic arm. Pry up this arm, and gently turn the switch a quarter turn to release it from the panel. So I didn't confuse which wire goes where, I only removed one wire from the old switch at a time, connecting that wire to the new switch before I unplugged the other wire. Pull the wire adapter off by grasping its metal neck with a pair of needle-nosed pliers. Put the new switch in the panel's hole, giving it that quarter turn that will allow that plastic arm to fall into its hole. Lower the control panel back down, making sure that the little feet on the bottom are back in their holes. Replace those two screws, noting that they go in at a 45 degree angle toward the back, not just straight down. Pop the end caps back on, and slide the start button back on (pay attention to aligning the flat side of spindle with flat side of the knob's interior. Done! (Took a lot less time to do it than to write this!)
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Paul from Winston-Salem, NC
  • Parts Used:
    WP3395382
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
replaced start switch
replaced switch
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Earl from Okanogan, WA
  • Parts Used:
    WP3395382, WP3392519
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set
Dryer would not start
I removed the start button and opened it up. The contact points were badly burned. After looking on the internet I decided to order the start button and also the thermal fuse because a faulty start button can cause the thermal fuse to go out. after receiving the parts, I was able to install the parts in less than a half hour. The dryer started up and I was done.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Compatibility
This part works with the following models:
Fix Number: FIX11741476
Manufacturer Part Number: WP3395382
Brand
Model Number
Description
Kenmore
11060202990
Dryer
Kenmore
11060212990
Dryer
Kenmore
11060602990
Dryer
Kenmore
11060612990
Dryer
Kenmore
11060622990
Dryer
Kenmore
11060832990
Dryer
Kenmore
11060842990
Dryer
Kenmore
1106085299
Dryer - Kenmore Dryer Model 110.6085299 (1106085299, 110 6085299) Parts
Kenmore
11060852990
Dryer
Kenmore
11060854990
Dryer
Kenmore
11060857990
Dryer
Kenmore
11060882990
Dryer
Kenmore
11060884990
Dryer
Kenmore
11060887990
Dryer
Kenmore
1106090199
Dryer - Kenmore Dryer Model 110.6090199 (1106090199, 110 6090199) Parts
Kenmore
11060901990
Dryer
Kenmore
1106090299
Dryer - Kenmore Dryer Model 110.6090299 (1106090299, 110 6090299) Parts
Kenmore
11060902990
Dryer
Kenmore
11060904990
Dryer
Kenmore
1106090799
Dryer - Kenmore Dryer Model 110.6090799 (1106090799, 110 6090799) Parts
Kenmore
11060907990
Dryer
Kenmore
11060922990
Dryer
Kenmore
11060924990
Dryer
Kenmore
11060927990
Dryer
Kenmore
1106093299
Dryer - Kenmore Dryer Model 110.6093299 (1106093299, 110 6093299) Parts
Kenmore
11060932990
Dryer
Kenmore
1106093699
Dryer - Kenmore Dryer Model 110.6093699 (1106093699, 110 6093699) Parts
Kenmore
11060936990
Dryer
Kenmore
1106094299
Dryer - Kenmore Dryer Model 110.6094299 (1106094299, 110 6094299) Parts
Kenmore
11060942990
Dryer - Kenmore Dryer