OEM General Electric Dryer Duct Felt Seal [WE09X20441] | Ships Today | Fix.com
Duct Felt Seal – Part Number: WE09X20441
Duct Felt Seal – Part Number: WE09X20441 https://fixcom.azureedge.net/Schematics/GE/00002276i02.gif

Duct Felt Seal

Your Price
$7.53

Fix Number: FIX9861764

Manufacturer #: WE09X20441

Manufactured by: GE

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Part description

May differ in appearance but functions same as original.

Works with the following brands

General Electric, Hotpoint, Kenmore

Works with the following products

Dryer, Washer Dryer Combo

Fixes the following symptoms

Noisy | Marks left on clothes | Takes too long to dry | No heat or not enough heat

Videos For installing this part.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.7 / 5.0, 26 reviews
>
<
Customer:
Nae from BRENTWOOD, TN
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
The dry was making a whining sound. Very loud.
I followed all the video on the website with all the parts I had purchased. Very easy. Just make sure you unplug the dryer first. Thank you,
6 of 7 people found these instructions helpful

Were these instructions helpful?   

Customer:
Donald L. from Belmont, MA
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Dark marks on clothing; clothing sticking between drum and front panel
Others with the same problem of dark marks on clothing suggested replacing the white and the grey drum slides that slip into the front drum bearing unit. When I open up the dryer, I did find that both the white and grey drum slides on one side of the front drum bearing piece had completely worn away, and some of the drum bearing piece was also worn away. I had decided in advance to order both white slides, both grey slides, a new felt seal, and the front drum bearing piece. Possibly I could have reused the old front drum bearing, but the replacement was cheap enough. Three bits of advice: 1) if you replace the felt seal, make sure you get it tucked behind the clips on the door panel; 2) if you replace the front drum bearing piece, once you have the dryer put back together, reach up and pull the plastic drum bearing toward you to be sure it is fully snapped into place; 3) after you replace the slides or felt, the drum will make mild rubbing noises as it turns, so run the dryer with no heat for about 30 minutes to seat the parts.
2 of 2 people found these instructions helpful

Were these instructions helpful?   

Customer:
Gerald from Schertz, TX
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Screeching and catching on to clothes
Followed video instructions. Piece of cake. Thank you!
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Vincent from Apopka, FL
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Takes a long time to dry
Followed the video that was provided on the web site
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Tennyson from Walters, OK
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Loud squeek when in use
Remove the front panel and replaced the front support and slides.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Darlene from Rio Rancho, NM
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Noisy dryer
Repair was easy for this housewife! I had no problems, took off top panel, then removed face panel. Slides and felts were easy to find and replace. Seriously took less than 25 minutes total. Videos helped also! Dryer fixed, even better!!!
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Robin from Onset, MA
Parts Used:
  • Duct Felt Seal
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
When recently cleaning my dryer I noticed felt seal was worn.
Opened front door removed screws holding top of dryer on. Removed the top which exposed screws holding front panel on. Removed those screws and carefully pivoted the door to the left being mindful of the wires that are attached. Propped that up against nearby wall removed old gasket put in new one. Screwed front then top back on and gave it a test run. Works perfectly.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
VINCENT FLYNN from FARMINGTON, NH
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Squeeking
Followed the video instructions provided by this site No confusing, hard to decipher diagrams or written instructions. The whole process took 30 minutes half of which was cleaning out 5 years of accumulated lint.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Willard J from Havre de Grace, MD
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Squeaking and clothes getting caught between drum and dryer causing clothes to be damaged.
Removed screws from top and front leaving bottom screws in just loose.Front will lift off lower bottom screws to make reinstall much easier and quicker repair.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
william from Dalton, GA
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Scraping noise
Followed your video. no problem, very easy thanks saved lot of money on repair cost.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Paul from South Bend, IN
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
High pitch squeal coming from dryer
Disconnected the dryer. Unscrewed front screws inside the door on top. Took off front cover and top cover. 1st removed felt and installed new felt. The old felt came out quickly. I used a flat head screwdriver to push the felt in flat. I did not disconnect anything else. Then, I pushed the drum toward the front of the machine and pushed the sides out a bit so it could come out of its sleeve. I did not remove the belt. You only need to move it forward enough to reach in and take out the old sleeve. Then, with a flashlight I was able to reach in and take out the old sleeve. I took a towel and wiped it clean and added lubricant and then installed the new sleeve an o-ring. Put everything back. Be careful the edges are sharp and my forearm got cut but no big deal.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Larry from BROOKINGS, OR
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Drum was hitting the side of the dryer as it rotated making a thumping sound.
I watched a couple of videos on the internet. Finally found one that showed me how to take the front off. Three screws hold on the control panel back. Then two screws hold the top down. Un plug the door switch and door light. remove the electrical panel screws and get it out of the way. Then 4 screws (the 2 at bottom just loosen) hold the front on. When the from is off, all parts are easily removed and installed. The old ones were really worn. The noise problem was solved.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
D Brant from Ponte Vedra Beach, FL
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Dark spots on clothes
Per the video instructions. It was fast and easy. A great service.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Jim from New Brighton, PA
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Dryer was squealing very loud
Repair was very easy. I open the door and removed the two front screws . Then removed top back screws to release the back panel.Remove the top then remove the side front screws and pull away the front. Disconnect the three wires and pull the front away. Remove the old front drum bearing by releasing the two locking tabs. Install the new. I also replaced the four drum glides. Remove the old felt seal and replace new making sure it is placed under the locking tabs. Replace top and door. Tighten all screws. Total time for repair is under 30 min
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Mary from Atlanta, IN
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Clothes getting caught in front of dryer.
Watched a video online. Just took out 6 screws and loosened 2 in order to get front door panel off. Had to have a Phillips, a flat screwdriver and one special tipped screwdriver to do this. The parts were very easy to replace. Then put the pieces back on. The great thing is it really fixed the problem!
0 of 1 people found these instructions helpful

Were these instructions helpful?   

>
<

Model Cross Reference

This part works with the following models:

Fix Number: FIX9861764
Manufacturer Part Number: WE09X20441
Brand
Model Number
Description
Kenmore
2661532513
Washer Dryer Combo - HOME LAUNDRY COMBO
General Electric
62160T3WB
Dryer
General Electric
62160T5WB
Dryer
General Electric
62261T0WW
Dryer
General Electric
62261T3WW
Dryer
General Electric
633615
Dryer
General Electric
633616
Dryer
General Electric
633617
Dryer
General Electric
63361T0WW
Dryer
General Electric
63361T3WW
Dryer
General Electric
63361T5WW
Dryer
General Electric
65300T0WB
Dryer
General Electric
65300T3WB
Dryer
General Electric
653615
Dryer
General Electric
653616
Dryer
General Electric
653617
Dryer
General Electric
65361T0WW
Dryer
General Electric
65361T3WW
Dryer
General Electric
65361T5WW
Dryer
General Electric
65371T0WW
Dryer
General Electric
65371T3WW
Dryer
General Electric
65371T5WW
Dryer
General Electric
662310
Dryer
General Electric
662311
Dryer
General Electric
662410
Dryer
General Electric
662411
Dryer
General Electric
662412
Dryer
General Electric
663615
Dryer
General Electric
663616
Dryer
General Electric
663617
Dryer