This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Works with the following brands:
General Electric, Hotpoint
Works with the following products:
Dryer
Fixes the following symptoms:
Timer Not Working
Part# WE04X20415 replaces these:
AP5805477, WE4M355, WE4M357
Works with the following brands:
General Electric, Hotpoint
Works with the following products
Dryer
Fixes the following symptoms
Timer Not Working
Part Number Cross Reference
Part# WE04X20415 replaces these:
AP5805477, WE4M355, WE4M357
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
December 12, 2021
Part WE4M357 (TIMER) has been superseded to Part WE04X20415
But the new part does not have terminal F for the white wire.
Where would the white wire go then?
For model number GTDX100GM2WW
Hello Peter, Thank you for your inquiry. We have included a link to our video on how to install a similar timer. We have also found the following wiring instructions: on the timer you'll want to connect yellow to X, white to T, red to B, orange to A and brown to C. The 6th wiring is a ground wire and is no longer used. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
If your current timer knob has become cracked or otherwise damaged, this is the replacement part you will need. This knob is meant for D-shaped shafts only. The timer knob allows you to select the amount of time your dry...
This clip fits inside the control knobs for your laundry machines, and helps to securely fasten the knob to the shaft, which allows you to easily turn the knob to select the correct settings. This is a genuine OEM part t...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
When rotating timer to select cycle, It didn't feel right.
Replaced the timer but that wasn't the problem. It was the timer knob. After examining the timer knob,I went and bought a new one,and fixed the problem. Please replace the knob first before replacing the timer. It takes 10 seconds to replace the knob.
Unscrewed the front panel, twisted off the timer and using the pliers I disconnected the wires one at a time while simultaneously connecting the wire to the new timer. Placed the new timer on the panel with a simple twist. Replaced panel and screws. Placed on new timer knob. Wahla! Received my parts in 2 days and it took me less than 15 m
... Read moreinutes total time to do
Easy,remove back of control panel with Phillips screwdriver, remove the timer knob may need a flat screwdriver to do this, now the timer can be removed from the back of front panel just twist and pull the timer out plenty of slack wire, remove blade connections one at a time (may need pliers) and install on new timer at same location, whe
... Read moren complete re-install timer as you removed it by twisting it into place,install back panel, on the stem of old timer or still inside the knob you will see a metal piece you need this piece as the stem is too small without it.
Read less
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX9491767
Manufacturer Part Number: WE04X20415
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.