This push-to-start switch is a genuine OEM part and is used to activate your dryer. If your dryer will not start, or will only start if the switch is pushed down, or the timer knob is not engaging with the starter, you may need to replace the switch. The tools you will need to replace this part are a Phillips screwdriver and a flat blade screwdriver. Please be sure to disconnect the power supply to your dryer before beginning this repair.
Works with the following brands:
General Electric, Hotpoint, Kenmore
Works with the following products:
Dryer, Washer Dryer Combo, Washer
Fixes the following symptoms:
Won’t Start, Touchpad does not respond, Will Not Start
Part# WE4M416 replaces these:
AP4980900, WE4M352, WE4M367
Works with the following brands:
General Electric, Hotpoint, Kenmore
Works with the following products
Dryer, Washer Dryer Combo, Washer
Fixes the following symptoms
Won’t Start, Touchpad does not respond, Will Not Start
Part Number Cross Reference
Part# WE4M416 replaces these:
AP4980900, WE4M352, WE4M367
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dale
March 2, 2024
Do you have a video to replace the starter?
For model number GTDX100EM1WW
Hello Dale, thank you for your inquiry. We have on our site, a testimonial from a previous customer that shared his repair. He says: Unplug dryer, remove screws and panel. Take picture of dryer motor so you will put wires back the same way . Remove screws using Allen wrench, then unplug wires put the new motor on secure, then put wires back on. View the photo make sure the wires are the same. Then plug your dryer back up. Total Repair Time 15-30 mins. Good luck with this repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
September 29, 2021
my switch has 4 wires can you give me the right part
For model number gtd33eask0ww
Hello James, thank you for writing. For your model number GTD33EASK0WW the control panel has a Push to Start Switch PS3487190 ( two spades) with is located to the far right on the panel. There is a Rotary Switch Part PS11736619 that is located to the far left of the panel. This is the one that has 4 spades. We hope this helps.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Step 1. After unplugging the dryer from the wall outlet, Removed 6 screws holding the back cover of the instrument panel. Step 2. Removed the start switch by gently twisting left and pulling out of the socket. Step 3. Removed the three wires, one at a time and placed them on the new start switch, then installed the new switch
... Read morein its socket by gently twisting to the right. (Note: plugged power cord back in and tried the new Start Switch. Still would not start.) Step 4. Removed the Timer Knob by pulling strait off the shaft, then replaced with the new knob. Pushed the Start button and the Dryer worked. The old knob was obviously stripped so as to slip on the Timer shaft, giving the impression it was moving but it was not.
Read less
8 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX3487190
Manufacturer Part Number: WE4M416
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.