Part Location Diagram of WE13X10011 GE Rear Bearing Shaft Support
See part 1232 in the diagram
( Grid squares measure 1x1 inch )

Rear Bearing Shaft Support

Works With Model WSM2780DBWWW!

Rated by 2 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$112.06
On Order
Fix Number: FIX265828
Manufacturer #: WE13X10011
Manufactured by: GE
Works With Model WSM2780DBWWW!

Product Description

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.7 / 5.0, 2 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Matt from Durango, CO
  • Parts Used:
    WE3X70, WE13X10011, WE12X10009
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
Trying To Pull The Drum Out...
. . . I first cut my finger on the back panel edge while trying to pull the drum up out of the bearing socket. I then unscrewed the bearing plate from the back of the drum (three screws on the inside smaller diameter). It was difficult to stand on the washer lid edges and pull the drum up and out. Once it was out, I needed a helper to hold the rear bracket up to the holes in the back panel while I put the screws in from the front side of the back panel to hold the new bracket in place. Screwing the new bearing plate onto the back of the drum made it relatively easy to drop the drum into the new bearing socket. Once that was done, buttoning up was easy and installing the new belt onto the tensioning wheel was not a problem.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    CARROLL from COLEBROOK, NH
  • Parts Used:
    WE3X70, WE13X10011
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
The Rear Bearing was about 99% worn through and the Rear Bearing shaft support was completly worn off
Removed the Top, the front door, and the drum and drive belt Then I removed the old Rear Bearing. I then removed the rear Bearing Shaft Support from the rear of the drum. When the new parts arrived, I reassembled the machine in reverse order.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Model Compatibility
This part works with the following models:
Fix Number: FIX265828
Manufacturer Part Number: WE13X10011
Brand
Model Number
Description
General Electric
52750
Washer
General Electric
52750-4
Washer
General Electric
52750-5
Washer
General Electric
64501
Dryer
General Electric
64501-1
Dryer
General Electric
64501-2
Dryer
General Electric
BEF221CAS0
Dryer
General Electric
BEF221CAS1
Dryer
General Electric
BEF221CAS2
Dryer
General Electric
DBL333EA0AA
Dryer - Electric
General Electric
DBL333EA0CC
Dryer - Electric
General Electric
DBL333EA0WW
Dryer - Electric
General Electric
DBL333EA1CC
Dryer - Electric
General Electric
DBL333EA1WW
Dryer - Electric
General Electric
DBL333EB0CC
Dryer - Electric
General Electric
DBL333EB0WW
Dryer - Electric
General Electric
DBL333EB1CC
Dryer - Electric
General Electric
DBL333EB1WW
Dryer - Electric
General Electric
DBL333EB3CC
Dryer - Electric
General Electric
DBL333EB3WW
Dryer - Electric
General Electric
DBL333EB4CC
Dryer - Electric
General Electric
DBL333EB4WW
Dryer - Electric
General Electric
DBL333EB6CC
Dryer - Electric
General Electric
DBL333EB6WW
Dryer - Electric
General Electric
DBL333EBC
Dryer - GE Dryer Model DBL333EBC Parts
General Electric
DBL333EBW
Dryer - GE Dryer Model DBL333EBW Parts
General Electric
DBL333EY0AA
Dryer - Electric
General Electric
DBL333EY0WW
Dryer - Electric
General Electric
DBL333GA0AA
Dryer - Gas
General Electric
DBL333GA0CC
Dryer - Gas