OEM General Electric Dryer Knob, Gray [WH01X10462] | Ships Today | Fix.com
Knob, Gray – Part Number: WH01X10462
Knob, Gray – Part Number: WH01X10462 Knob, Gray – Part Number: WH01X10462 https://fixcom.azureedge.net/Schematics/GE/00123831i01.gif

Knob, Gray

Your Price
$5.59

Fix Number: FIX2370714

Manufacturer #: WH01X10462

Manufactured by: GE

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Part description

This part is a replacement knob for your dryer. The knob fits onto a D-shaped shaft. To replace the knob, line up the back opening with the shaft and slide it in place. Make sure the dryer is turned off before beginning this repair.

Works with the following brands

General Electric

Works with the following products

Dryer, Washer

Fixes the following symptoms

Timer will not advance | Will Not Start | Shuts off too soon | Will not shut off

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.8 / 5.0, 12 reviews
Customer:
George from CARDINGTON, OH
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
My timer knob on my dryer broke and would no longer work so I had to buy a new one and get the right products and the job went very smooth thank you for your help
I started with a pair of channel locks turn the knob do in the position where I thought it should be then I took a little screwdriver and spread that little clip so I could remove it and then installed the new one with the new knob on it turned it to a setting hit the start button and I'm at work just like it was supposed to thank you for your speedy delivery and help me get to the destination I was trying to achieve again thank you very much for your help
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Bruce from Omaha, NE
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Replace timer (old one would not work with knob - timer shaft stripped)
Remove the dryer cord or shut off breaker, then take off all of the knobs from the appliance front, remove the six screws from the back, lift up keeper in lower right corner and twist out of place, move wires from old to the new timer, push thru hole in appliance front and twist into place. Replace the six screws, knobs, turn breaker back on or put cord back into place, test timer operation, and I was done in 15-20 minutes.
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Darlene from Milford, PA
Parts Used:
  • Knob, Gray
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Old knob cracked
Put new know on d-shaped shaft
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Gloria from Fairview Park, OH
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Dryer timer replacement
Easy job, but take your time and work carefully. Twist the old timer off keeping the wire connections. Twist on the new timer and transfer the wires one at a time. Wires are on tight so you might need pliers.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Wheeler from Deltona, FL
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Rotary switch broke
Open the box for the replacement part and plugged wire for wire and closed the cover back on and plugged into dryer outlet and it worked great
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
michael from flemington, NJ
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Gas dryer wouldn't stay on for the required time
First unplug power cord. I removed three Philips screws at top rear of control panel and tilted it forward. Then facing front of machine slide panel to the right to free bottom tabs. Twist out timer switch counter clockwise by releasing the locking tab.Install new timer switch by rotating it clockwise. Then careful remove wires one at a time from old timer to new installed timer. I used a small screw driver to pry up wire connectors. Its much easier to swap wires one at a time so as not to get confused about location positioning. Then with all wires firmly in place place control panel bottom back into slots tilt in place reinstall three screws, plug power cord back in.JOB DONE
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Matt from Las Vegas, NV
Parts Used:
  • Knob, Gray
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Knob kept breaking, used pliers to turn timer and it got to hard to turn with knobs.
I'm probably average to slightly below average on the handyman scale so trying to switch out an electrical part on an appliance was a definite don't mess with, but reading a few other post convinced me to give it a try. It was as easy as everyone says, few screws in the back to get to the timer, unplugged the wires 1 at a time and plugged them into the new one so I wouldn't get mixed up. Screwed the back back on and dryer is like new. Thanks ! Matt
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Barbara from Lexington, KY
Parts Used:
  • Knob, Gray
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
Heat selector on my dryer became cracked and did not work and did not work
I simply put the new knob on and instantly I could select my dryer heat and the dryer ran fine. I also had delivery within 24 hours. Thanks.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Bill from Baltimore, MD
Parts Used:
  • Knob, Gray
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Replace dryer knobs
old knobs were cracked just pulled them off and installed the new ones....
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
cindy from fillmore, IN
Parts Used:
  • Knob, Gray
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Broken dryer knob
Replaced broken knob by pulling old one off and putting new one on.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Wanda from Jasper, GA
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Knob continually broke and needed to replaced.
After reading the instructions posted by others, I carefully removed the control panel with a screw driver. I removed the timer from the back by twisting one side up and the other side down leaving all the wired attached. I removed the wires one at a time with pliers and replaced them in te corresponding place on the new timer. Each wire has a letter. I placed the timer back by twisting one side up and one side down in reverse of how I took it off. I replaced the control panel and pluged in the dryer(always remove the powersource first). It wored perfectly, my husband was very surprised that I had done it so fast and without him.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Bob from Rapid City, SD
Parts Used:
  • Knob, Gray
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Broken knob on dryer
The part I got from you worked great was the right one and was delivered to my home in just a few days. Pulled off broken knob pushed on new one. This was the first time I have used your company and it was easy and fast. I will use it agian thanks!
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

Fix Number: FIX2370714
Manufacturer Part Number: WH01X10462
Brand
Model Number
Description
General Electric
DLLSR40EG0WW
Dryer - Electric
General Electric
DLLSR40EG1WW
Dryer - Electric
General Electric
DLLSR40EG2WW
Dryer - Electric
General Electric
DLLSR40EG3WW
Dryer
General Electric
DLLSR40EG4WW
Dryer
General Electric
DLLSR40EG5WW
Dryer
General Electric
DLLSR40EG6WW
Dryer
General Electric
DLLSR40GG0WW
Dryer - Gas
General Electric
DLLSR40GG1WW
Dryer - Gas
General Electric
DLLSR40GG2WW
Dryer - Gas
General Electric
DLLSR40GG3WW
Dryer
General Electric
DLLSR40GG4WW
Dryer
General Electric
DLLSR40GG5WW
Dryer
General Electric
DLLSR40GG6WW
Dryer
General Electric
DLLSR40GG7WW
Dryer
General Electric
DQSR483EG0WW
Dryer - Electric
General Electric
DQSR483GG0WW
Dryer - Gas
General Electric
DRSR483EG0WW
Dryer - Electric
General Electric
DRSR483EG1WW
Dryer - Electric
General Electric
DRSR483EG2WW
Dryer - Electric
General Electric
DRSR483EG3WW
Dryer
General Electric
DRSR483EG4WW
Dryer
General Electric
DRSR483EG5WW
Dryer
General Electric
DRSR483EG6WW
Dryer
General Electric
DRSR483EG7WW
Dryer
General Electric
DRSR483GG0WW
Dryer - Gas
General Electric
DRSR483GG1WW
Dryer - Gas
General Electric
DRSR483GG2WW
Dryer - Gas
General Electric
DRSR483GG3WW
Dryer
General Electric
DRSR483GG4WW
Dryer