12722961-1-M-GE-WE09X27634-FELT TRAP DUCT

( Grid squares measure 1x1 inch )

12722961-1-S-GE-WE09X27634-FELT TRAP DUCT

12722961-2-S-GE-WE09X27634-FELT TRAP DUCT

FELT TRAP DUCT

Works With Model HTDX100EM8WW!

Rated by 27 customers

Really Easy

30 - 60 mins

Ratings submitted by customers like you who bought this part.

$11.56

Fix Number: FIX12722961

Manufacturer #: WE09X27634

Manufactured by: GE

Works With Model HTDX100EM8WW!

Product Description

This is a duct felt seal for a dryer. The duct felt seal allows the front-load dryer drum to glide smoothly on the front panel. Your dryer will not function properly if the drum felt seal is compromised. Disconnect power to the dryer before completing this repair. You will need to remove the front of the dryer to gain access to the felt seal. This felt seal may differ in appearance from your original but will function the same as your original. This is an OEM replacement part that is sourced directly from the authentic manufacturer.
Works with the following brands

General Electric, Hotpoint, Kenmore
Works with the following products
Dryer, Washer Dryer Combo
Fixes the following symptoms

Noisy, Marks left on clothes, Too hot
Part Number Cross Reference

Part# WE09X27634 replaces these:

WE09M0015, WE09X20441, WE9M15, WE9M30

1 Installation Video

4 Related Parts Questions and Answers

27 Installation Instructions Model Compatibility

Product Description Part Videos Questions and Answers Related Parts Installation Instructions Model Compatibility

Product Description

This is a duct felt seal for a dryer. The duct felt seal allows the front-load dryer drum to glide smoothly on the front panel. Your dryer will not function properly if the drum felt seal is compromised. Disconnect power to the dryer before completing this repair. You will need to remove the front of the dryer to gain access to the felt seal. This felt seal may differ in appearance from your original but will function the same as your original. This is an OEM replacement part that is sourced directly from the authentic manufacturer.

Works with the following brands:

General Electric, Hotpoint, Kenmore
Works with the following products:
Dryer, Washer Dryer Combo
Fixes the following symptoms:

Noisy, Marks left on clothes, Too hot
Part# WE09X27634 replaces these:

WE09M0015, WE09X20441, WE9M15, WE9M30

Videos For installing this part.

Replacing your FELT TRAP DUCT

Questions and Answers

Be the first to ask our experts a question about this part!

Related PartsAdditional or alternate parts to consider.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.7 / 5.0, 27 reviews.

< Prev
1
2
3
Next >

Sort by:

Customer:

Donald L. from Belmont, MA
Parts Used:
WE09X27634, WE1M1067, WE3M26, WE1M504
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

Dark marks on clothing; clothing sticking between drum and front panel

Others with the same problem of dark marks on clothing suggested replacing the white and the grey drum slides that slip into the front drum bearing unit. When I open up the dryer, I did find that both the white and grey drum slides on one side of the front drum bearing piece had completely worn away, and some of the drum bearing piece was also worn away. I had decided in advance to order both white slides, both grey slides, a new felt seal, and the front drum bearing piece. Possibly I could have reused the old front drum bearing, but the replacement was cheap enough. Three bits of advice: 1) if you replace the felt seal, make sure you get it tucked behind the clips on the door panel; 2) if you replace the front drum bearing piece, once you have the dryer put back together, reach up and pull the plastic drum bearing toward you to be sure it is fully snapped into place; 3) after you replace the slides or felt, the drum will make mild rubbing noises as it turns, so run the dryer with no heat for about 30 minutes to seat the parts.

8 of 8 people found this instruction helpful.