M Series Ignition Coil Kit

This coil ignition kit is used in dryers to open the gas valve when the dryer is on. This kit includes two coils. One is a two-wire secondary coil and the other is a three-wire booster coil. If your dryer does not heat or you notice heating inconsistencies, then the gas valve may be damaged and it is best to replace it to solve this problem. To repair, first release the two retaining clips that hold the top panel in place, then remove two screws that retain the front panel of the dryer cabinet. Next, pull the front panel forward and remember to disconnect the door switch. After accessing the gas coils, start removing the wires and unscrew the bracket that holds the coils. Remember to remove both the dual and main coil without removing the spacer. For more information on the kit and repair instructions, refer to diagram for a list of the parts.

• Works with the following brands:
  Frigidaire, Kenmore, Gibson, Westinghouse
• Works with the following products:
  Dryer, Washer Dryer Combo
• Part# 5303931775 replaces these:
  AP2150379, 3449, 5303931775, 08015679, 08015680, 3201243 ... Show more , 3201244, 3281142, 3281143, 5300622602, 5303307291, 5303307292, 5308015680, 8015679, 8015680, F140570-300, F140570-400, G140570-300, G140570-400, Q000622601, Q000622602, Q622601, Q622602, WQ622601, WQ622602 Show less